Documentation for phy-rcar-usb-gen2 device tree binding. Signed-off-by: Ben Dooks <[email protected]> -- Cc: [email protected] Cc: [email protected] Cc: [email protected] --- .../bindings/usb/renesas,rcar-gen2-usb-phy.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt new file mode 100644 index 0000000..e1d2dd9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt @@ -0,0 +1,16 @@ +Renesas RCar gen2 USB PHY bindings + +Required properties: + - compatible: "renesas,usb-phy-r8a7790" for the R8A7790 SoC or + "renesas,rcar-gen2-usb-phy" for any generic comaptible device. + - reg : A single region to access device registers + - clocks : The reference to the clock to use for this block + - clock-names : The name for the clock at index 0 (must be "usbhs") + +Note, interrupt is currently not supported by the driver, but there should +be a node in the device tree for it. + +Optional properties: + + - renesas,usb0-hs: boolean, if present USB0 is connected to HS device. + - renesas,usb2-ss: boolean, if present USB2 is connected to XHCI controller. -- 1.8.5.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
