On Mon, 2014-01-27 at 01:33 +0100, Christoph Fritz wrote: > This set of patches adds board support for an omap3 system from INCOstartec. > It's based on next-20140124. > > Due to a regression since next-20140115 the following errors are present: > > - pin sys_clkout2, which gets configured to 24 Mhz by the fourth patch > in this set, erroneously outputs only 12 Mhz. > Just out of curiosity, configuring it to 48 Mhz puts out desired 24 Mhz. > > - omap_dss, which gets configured by the third patch in this set, fails > to do 'dss_set_fck_rate(fck);' in > drivers/video/omap2/dss/dss.c:dss_setup_default_clock() which leads to: > > | omapdss_dss: probe of omapdss_dss failed with error -22 > | omapdss CORE error: Failed to initialize DSS platform driver > | panel-dpi panel-dpi.0: failed to find video source 'dpi.0 > > Both regressions seem to have something to do with the clock framework. > Could this be related to the DT clock conversion patches?
Now with dt clock conversion fixes on its way, any chance to get this upstream? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
