From: Pratyush Anand <[email protected]> ST miphy40lp can be used with PCIe, SATA and Super Speed USB controllers. SPEAr13XX SoCs use this phy for PCIe and SATA.
Signed-off-by: Pratyush Anand <[email protected]> Cc: Mohit Kumar <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Viresh Kumar <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: [email protected] Cc: [email protected] --- .../devicetree/bindings/phy/st-miphy40lp.txt | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/st-miphy40lp.txt diff --git a/Documentation/devicetree/bindings/phy/st-miphy40lp.txt b/Documentation/devicetree/bindings/phy/st-miphy40lp.txt new file mode 100644 index 0000000..1c8d04c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-miphy40lp.txt @@ -0,0 +1,18 @@ +ST miphy40lp DT detail +=================================== + +miphy40lp is a phy controller from ST Microelectronics which supports PCIe, +SATA and Super Speed USB host and devices. It has been used in SPEAr13xx SOCs. + +Required properties: +- compatible : should be "st,miphy40lp-phy" + Other supported soc specific compatible: + "st,spear1310-miphy" + "st,spear1340-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- phy-id: Instance id of the phy. +- #phy-cells : from the generic PHY bindings, must be 1. + - 1st cell: phandle to the phy node. + - 2nd cell: 0 if phy (in 1st cell) is to be used for SATA, 1 for PCIe + and 2 for Super Speed USB. -- 1.7.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
