The i.MX6 contains a power controller that controls power gating and sequencing for the SoC's power domains.
Signed-off-by: Philipp Zabel <[email protected]> --- .../devicetree/bindings/power/fsl,imx-gpc.txt | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpc.txt diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt new file mode 100644 index 0000000..3ec8c0e --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -0,0 +1,61 @@ +Freescale i.MX General Power Controller +======================================= + +The i.MX6Q General Power Control (GPC) block contains DVFS load tracking +counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power +domains. + +Required properties: +- compatible: Should be "fsl,imx6q-gpc" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain GPC interrupt request 1 +- pu-supply: Link to the LDO regulator powering the PU power domain +- #address-cells, #size-cells: Should be <1> + +The gpc node should contain 'power-domain' subnodes for each power domain. +These serve as phandle targets for devices belonging to the power domain: + +Power domains controlled by a PGC register set +============================================== + +Required properties: +- compatible: Should be "fsl,imx6q-power-domain" +- reg: should be register base and length as documented in the + datasheet + +Specifying power domain for IP modules +====================================== + +IP cores belonging to a power domain should contain a 'power-domain' property +that is a phandle pointing to the power-domain subnode of the gpc device node. + +Required properties: +- power-domain: A phandle pointing to the power-domain device tree node + + +Example: + + gpc: gpc@020dc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04 0 90 0x04>; + pu-supply = <®_pu>; + + pd_pu: power-domain@020dc260 { + compatible = "fsl,imx6q-power-domain"; + reg = <0x020dc260 0x10>; + }; + }; + +Example of a device that is part of a power domain: + + vpu: vpu@02040000 { + reg = <0x02040000 0x3c000>; + /* ... */ + power-domain = <&pd_pu>; + /* ... */ + }; + -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
