On Wed, Feb 05, 2014 at 09:46:13PM +0200, Ivan Khoronzhuk wrote: > Add new AEMIF driver for EMIF16 Texas Instruments controller. > The EMIF16 module is intended to provide a glue-less interface to > a variety of asynchronous memory devices like ASRA M, NOR and NAND > memory. A total of 256M bytes of any of these memories can be > accessed at any given time via 4 chip selects with 64M byte access > per chip select. > > Synchronous memories such as DDR1 SD RAM, SDR SDRAM and Mobile SDR > are not supported. > > This controller is used on SoCs like Davinci, Keysone2 > > Acked-by: Santosh Shilimkar <[email protected] > Signed-off-by: [initial author] Murali Karicheri <[email protected]>
What's this [] stuff? If Murali wrote this, that name needs to be in a "From:" line in the patch to properly attribute it, and drop the [] here. > Signed-off-by: Ivan Khoronzhuk <[email protected]> > --- > drivers/memory/Kconfig | 11 ++ > drivers/memory/Makefile | 1 + > drivers/memory/ti-aemif.c | 429 > ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 441 insertions(+) > create mode 100644 drivers/memory/ti-aemif.c > > diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig > index 29a11db..7bc3982 100644 > --- a/drivers/memory/Kconfig > +++ b/drivers/memory/Kconfig > @@ -7,6 +7,17 @@ menuconfig MEMORY > > if MEMORY > > +config TI_AEMIF > + tristate "Texas Instruments AEMIF driver" > + depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF > + help > + This driver is for the AEMIF module available in Texas Instruments > + SoCs. AEMIF stands for Asynchronous External Memory Interface and > + is intended to provide a glue-less interface to a variety of > + asynchronuous memory devices like ASRAM, NOR and NAND memory. A total > + of 256M bytes of any of these memories can be accessed at a given > + time via four chip selects with 64M byte access per chip select. > + > config TI_EMIF > tristate "Texas Instruments EMIF driver" > depends on ARCH_OMAP2PLUS > diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile > index 969d923..d4e150c 100644 > --- a/drivers/memory/Makefile > +++ b/drivers/memory/Makefile > @@ -5,6 +5,7 @@ > ifeq ($(CONFIG_DDR),y) > obj-$(CONFIG_OF) += of_memory.o > endif > +obj-$(CONFIG_TI_AEMIF) += ti-aemif.o > obj-$(CONFIG_TI_EMIF) += emif.o > obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o > obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o > diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c > new file mode 100644 > index 0000000..8d15d87 > --- /dev/null > +++ b/drivers/memory/ti-aemif.c > @@ -0,0 +1,429 @@ > +/* > + * TI AEMIF driver > + * > + * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. > http://www.ti.com/ > + * > + * Authors: > + * Murali Karicheri <[email protected]> > + * Ivan Khoronzhuk <[email protected]> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/clk.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > + > +#define TA_SHIFT 2 > +#define RHOLD_SHIFT 4 > +#define RSTROBE_SHIFT 7 > +#define RSETUP_SHIFT 13 > +#define WHOLD_SHIFT 17 > +#define WSTROBE_SHIFT 20 > +#define WSETUP_SHIFT 26 > +#define EW_SHIFT 30 > +#define SS_SHIFT 31 > + > +#define TA(x) ((x) << TA_SHIFT) > +#define RHOLD(x) ((x) << RHOLD_SHIFT) > +#define RSTROBE(x) ((x) << RSTROBE_SHIFT) > +#define RSETUP(x) ((x) << RSETUP_SHIFT) > +#define WHOLD(x) ((x) << WHOLD_SHIFT) > +#define WSTROBE(x) ((x) << WSTROBE_SHIFT) > +#define WSETUP(x) ((x) << WSETUP_SHIFT) > +#define EW(x) ((x) << EW_SHIFT) > +#define SS(x) ((x) << SS_SHIFT) > + > +#define ASIZE_MAX 0x1 > +#define TA_MAX 0x3 > +#define RHOLD_MAX 0x7 > +#define RSTROBE_MAX 0x3f > +#define RSETUP_MAX 0xf > +#define WHOLD_MAX 0x7 > +#define WSTROBE_MAX 0x3f > +#define WSETUP_MAX 0xf > +#define EW_MAX 0x1 > +#define SS_MAX 0x1 > +#define NUM_CS 4 > + > +#define TA_VAL(x) (((x) & TA(TA_MAX)) >> TA_SHIFT) > +#define RHOLD_VAL(x) (((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT) > +#define RSTROBE_VAL(x) (((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT) > +#define RSETUP_VAL(x) (((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT) > +#define WHOLD_VAL(x) (((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT) > +#define WSTROBE_VAL(x) (((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT) > +#define WSETUP_VAL(x) (((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT) > +#define EW_VAL(x) (((x) & EW(EW_MAX)) >> EW_SHIFT) > +#define SS_VAL(x) (((x) & SS(SS_MAX)) >> SS_SHIFT) > + > +#define NRCSR_OFFSET 0x00 > +#define AWCCR_OFFSET 0x04 > +#define A1CR_OFFSET 0x10 > + > +#define ACR_ASIZE_MASK 0x3 > +#define ACR_EW_MASK BIT(30) > +#define ACR_SS_MASK BIT(31) > +#define ASIZE_16BIT 1 > + > +#define CONFIG_MASK (TA(TA_MAX) | \ > + RHOLD(RHOLD_MAX) | \ > + RSTROBE(RSTROBE_MAX) | \ > + RSETUP(RSETUP_MAX) | \ > + WHOLD(WHOLD_MAX) | \ > + WSTROBE(WSTROBE_MAX) | \ > + WSETUP(WSETUP_MAX) | \ > + EW(EW_MAX) | SS(SS_MAX) | \ > + ASIZE_MAX) > + > +#define DRV_NAME "ti-aemif" What's wrong with KBUILD_MODNAME? > +static int aemif_probe(struct platform_device *pdev) > +{ > + int ret = -ENODEV, i; Extra spaces? Split this into two lines? > + struct resource *res; > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *child_np; > + struct aemif_device *aemif; > + > + if (np == NULL) > + return 0; > + > + aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL); > + if (!aemif) { > + dev_err(dev, "cannot allocate memory for aemif\n"); Not needed, you'll get a message from kzalloc about this. > + return -ENOMEM; > + } > + > + platform_set_drvdata(pdev, aemif); > + > + aemif->clk = devm_clk_get(dev, NULL); > + if (IS_ERR(aemif->clk)) { > + dev_err(dev, "cannot get clock 'aemif'\n"); > + return PTR_ERR(aemif->clk); No freeing memory? > + } > + > + clk_prepare_enable(aemif->clk); > + aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC; > + > + if (of_device_is_compatible(np, "ti,da850-aemif")) > + aemif->cs_offset = 2; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + aemif->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(aemif->base)) { > + ret = PTR_ERR(aemif->base); > + goto error; > + } > + > + /* > + * For every controller device node, there is a cs device node that > + * describe the bus configuration parameters. This functions iterate > + * over these nodes and update the cs data array. > + */ > + for_each_available_child_of_node(np, child_np) { > + ret = of_aemif_parse_abus_config(pdev, child_np); > + if (ret < 0) > + goto error; > + } > + > + for (i = 0; i < aemif->num_cs; i++) { > + ret = aemif_config_abus(pdev, i); > + if (ret < 0) { > + dev_err(dev, "Error configuring chip select %d\n", > + aemif->cs_data[i].cs); > + goto error; > + } > + } > + > + /* > + * Create a child devices explicitly from here to > + * guarantee that the child will be probed after the AEMIF timing > + * parameters are set. > + */ > + for_each_available_child_of_node(np, child_np) { > + ret = of_platform_populate(child_np, NULL, NULL, dev); > + if (ret < 0) > + goto error; > + } > + > + return 0; > +error: > + clk_disable_unprepare(aemif->clk); > + return ret; No freeing memory? > +} > + > +static int aemif_remove(struct platform_device *pdev) > +{ > + struct aemif_device *aemif = platform_get_drvdata(pdev); > + clk_disable_unprepare(aemif->clk); Extra line needed. > + return 0; > +} thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
