From: Grant Likely <[email protected]> Date: Tue, 18 Feb 2014 16:15:51 +0000
> On Tue, 18 Feb 2014 12:16:58 +0000, Ben Dooks <[email protected]> > wrote: >> The of_mdiobus_register_phy() is not setting phy->irq thus causing >> some drivers to incorrectly assume that the PHY does not have an >> IRQ associated with it. Not only do some drivers report no IRQ >> they do not install an interrupt handler for the PHY. >> >> Simplify the code setting irq and set the phy->irq at the same >> time so that we cover the following issues, which should cover >> all the cases the code will find: >> >> - Set phy->irq if node has irq property and mdio->irq is NULL >> - Set phy->irq if node has no irq and mdio->irq is not NULL >> - Leave phy->irq as PHY_POLL default if none of the above >> >> This fixes the issue: >> net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI >> >> to the correct: >> net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI >> >> Signed-off-by: Ben Dooks <[email protected]> > > Looks okay to me > > Reviewed-by: Grant Likely <[email protected]> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
