On Tue, Feb 18, 2014 at 07:16:22PM +0530, Ashutosh singh wrote:
> This patch adds support for USB_OTG on Phytec phyFLEX-i.MX6 Quad module.
>
> Signed-off-by: Ashutosh singh <[email protected]>
Please have the prefix of patch subject be 'ARM: dts: imx6q-phytec: ...'
> ---
> arch/arm/boot/dts/imx6q-phytec-pbab01.dts | 4 ++++
> arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 17 +++++++++++++++++
> 2 files changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
> b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
> index 7d37ec6..87c3702 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
> @@ -25,6 +25,10 @@
> status = "okay";
> };
>
> +&usbotg {
> + status = "okay";
> +};
> +
> &usdhc2 {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> index 1a3b50d..e025ad2 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> @@ -18,6 +18,14 @@
> memory {
> reg = <0x10000000 0x80000000>;
> };
> +
> + reg_usb_otg_vbus: regulator@0 {
You do not have a 'reg' property in the node, so you shouldn't have
'@num' in node name. You may want to name it 'regulator-0'.
> + compatible = "regulator-fixed";
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio4 15 0>;
> + };
> };
>
> &ecspi3 {
> @@ -134,6 +142,7 @@
> MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
> MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /*
> SPI NOR chipselect */
> MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /*
> PMIC interrupt */
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /*
> USB_OTG_PWR_EN */
Don't add it into hog group. Define a pinctrl state in above regulator
node for it.
> >;
> };
> };
> @@ -162,6 +171,14 @@
> status = "disabled";
> };
>
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg_1>;
pinctrl_usbotg_1 is gone. Please generate the patch against my for-next
branch below.
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
Shawn
> + disable-over-current;
> + status = "disabled";
> +};
> +
> &usdhc2 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc2_2>;
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
