Hi Krzysztof, On 5 March 2014 14:52, Krzysztof Kozlowski <[email protected]> wrote: > Add bindings documentation for S2MPS14 device to the s2mps11 driver.
nit: s/s2mps11/S2MPS11 > > Signed-off-by: Krzysztof Kozlowski <[email protected]> > Cc: Mark Brown <[email protected]> > Cc: Liam Girdwood <[email protected]> > Cc: Tomasz Figa <[email protected]> > Cc: [email protected] > Cc: Rob Herring <[email protected]> > Cc: Pawel Moll <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Ian Campbell <[email protected]> > Cc: Kumar Gala <[email protected]> > Acked-by: Tomasz Figa <[email protected]> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt > b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 15ee89c3cc7b..f69bec294f02 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11 Voltage and Current Regulator > +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. > Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic". > +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the > LDO or BUCK number > as per the datasheet of s2mps11. > > - LDOn > - - valid values for n are 1 to 38 > + - valid values for n are: > + - S2MPS11: 1 to 38 > + - S2MPS14: 1 to 25 > - Example: LDO1, LD02, LDO28 > - BUCKn > - - valid values for n are 1 to 10. > + - valid values for n are: > + - S2MPS11: 1 to 10 > + - S2MPS14: 1 to 5 > - Example: BUCK1, BUCK2, BUCK9 > > Example: > -- > 1.7.9.5 > Looks good. Acked-by: Sachin Kamat <[email protected]> -- With warm regards, Sachin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
