Hi Shawn,
thank you for the comments.
Am Mittwoch, den 05.03.2014, 14:56 +0800 schrieb Shawn Guo:
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index 33567aa..3c58f2e 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -808,6 +808,7 @@ config SOC_IMX6Q
> > select PL310_ERRATA_727915 if CACHE_PL310
> > select PL310_ERRATA_769419 if CACHE_PL310
> > select PM_OPP if PM
> > + select PM_GENERIC_DOMAINS if PM
>
> Would it make more sense to have HAVE_IMX_GPC select it instead?
Yes, I'll change that.
> > +#include <linux/pm_clock.h>
>
> Is this header still needed?
No, will remove.
[...]
> > +struct pu_domain {
> > + struct generic_pm_domain base;
> > + struct regulator *reg;
> > + struct clk *clk[6];
>
> Define a macro for this number?
#define GPC_CLK_MAX 6
[...]
> > +static int imx_gpc_probe(struct platform_device *pdev)
> > +{
> > + struct regulator *pu_reg;
> > + struct clk *clk;
> > + bool is_off;
> > + int ret, i;
> > +
> > + pu_reg = devm_regulator_get(&pdev->dev, "pu");
> > + if (IS_ERR(pu_reg)) {
> > + ret = PTR_ERR(pu_reg);
> > + dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* The regulator is initially enabled */
> > + ret = regulator_enable(pu_reg);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to enable pu regulator: %d\n", ret);
> > + return ret;
> > + }
> > + imx6q_pu_domain.base.of_node = pdev->dev.of_node;
>
> How does this work with !CONFIG_PM build?
Since I removed the regulator-always-on property from the PU regulator
in the device tree, if CONFIG_PM is disabled, we have to request and
enable pu_reg here. Otherwise the regulator framework will helpfully
turn it off (imx6q-cpufreq never enables pu_reg).
With the PU regulator disabled, the system would hang as soon as the
CODA VPU or one of the Vivante GPU cores is accessed if !CONFIG_PM.
> > + imx6q_pu_domain.reg = pu_reg;
> > +
> > + for (i = 0; ; i++) {
> > + clk = of_clk_get(pdev->dev.of_node, i);
> > + if (IS_ERR(clk))
> > + break;
Also, I should probably add
+ if (i >= GPC_CLK_MAX) {
+ dev_err(&pdev->dev, "more than %d clocks\n",
+ GPC_CLK_MAX);
+ return -EINVAL;
+ }
here.
> > + imx6q_pu_domain.clk[i] = clk;
> > + }
> > + imx6q_pu_domain.num_clks = i;
[...]
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
