Hello.
On 03/06/2014 09:01 PM, Ben Dooks wrote:
Add support for the phy-rcar-gen2-usb driver to be probed from device tree.
Signed-off-by: Ben Dooks <[email protected]>
Reviewed-by: Ian Molton <[email protected]>
---
Fixes from v2:
- fix missed of_match_ptr()
- fix names of channel selection booleans
- updated and merged documentation for dt entries
Fixes from v2:
- fix missing of_if patch
Fixes from v1:
- use of_property_reasd-bool()
- remove unused of_id variable
Cc: Felipe Balbi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Magnus Damm <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: [email protected]
Conflicts:
drivers/usb/phy/phy-rcar-gen2-usb.c
---
.../bindings/usb/renesas,rcar-gen2-usb-phy.txt | 36 ++++++++++++++++++++++
drivers/pci/host/pci-rcar-gen2.c | 1 +
Eh? What does this file have to do with USB PHY?
drivers/usb/phy/phy-rcar-gen2-usb.c | 34 +++++++++++++++++---
3 files changed, 66 insertions(+), 5 deletions(-)
create mode 100644
Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt
diff --git
a/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt
b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt
new file mode 100644
index 0000000..5351a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,rcar-gen2-usb-phy.txt
@@ -0,0 +1,36 @@
+Renesas RCar gen2 USB PHY bindings
+----------------------------------
+
+Bindings for the USB PHY block used in some Renesas SoCs.
+
+Required properties:
+ - compatible: "renesas,usb-phy-r8a7790" for the R8A7790 SoC
+ "renesas,usb-phy-r8a7791" for the R8A7791 SoC
+ - reg : A single region to access device registers
+ - clocks : The reference to the clock to use for this block
+ - clock-names : The name for the clock at index 0 (must be "usbhs")
+
+Optional properties:
+
+ - renesas,usb0-device: boolean, if present USB0 is connected to HS device
+ otherwise the USB0 is connected to OHCI/EHCI host.
IIUC, the testing has shown that USBHS is dual-role controller in that
case, i.e. supports both host and device roles (the manual has the host
controller details too). Vladimir, is it so?
+ - renesas,usb2-xhci: boolean, if present USB2 is connected to XHCI controller
+ otherwise the USB2 is connected to OHCI/EHCI host.
+
+
+Example device node for SoC dtsi file:
+
+ usbphy: usbphy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clock-names = "usbhs";
+ reg = < 0x0 0xe6590100 0x0 0x100>;
+ status = "disabled";
+ };
+
+Example board file:
+
+&usbphy {
+ status = "okay";
+};
These are usually merged into one node for the example.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
