On Tue, Feb 25, 2014 at 11:41:19AM +0000, Lee Jones wrote:
> Cc: [email protected]
> Cc: Srinivas Kandagatla <[email protected]>
> Acked-by: Alexandre Torgue <[email protected]>
> Signed-off-by: Lee Jones <[email protected]>
> ---
> Documentation/devicetree/bindings/ata/ahci-st.txt | 31
> +++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ata/ahci-st.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt
> b/Documentation/devicetree/bindings/ata/ahci-st.txt
> new file mode 100644
> index 0000000..1b69fa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
> @@ -0,0 +1,31 @@
> +STMicroelectronics STi SATA controller
Is that a family name or a particular device?
> +
> +This binding describes a SATA device.
> +
> +Required properties:
> + - compatible : Must be "st,ahci"
Is there not a more specific name? This is awfully generic.
> + - reg : Physical base addresses and length of register sets
> + - interrupts : Interrupt associated with the SATA device
> + - interrupt-names : Associated name must be; "hostc"
> + - resets : The power-down and soft-reset lines of SATA IP
> + - reset-names : Associated names must be; "pwr-dwn" and "sw-rst"
Get rid of the semicolon, it makes this harder to read. Same for the
other -names proeprties.
> + - clocks : The phandle for the clock
> + - clock-names : Associated name must be; "ahci_clk"
> + - phys : The phandle for the PHY device
> + - phy-names : Associated name must be; "ahci_phy"
This looks sane, but I'd like to see a more specific description and
compatible string.
Cheers,
Mark.
> +
> +Example:
> +
> + sata0: sata@fe380000 {
> + compatible = "st,ahci";
> + reg = <0xfe380000 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
> + interrupt-names = "hostc";
> + phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
> + phy-names = "ahci_phy";
> + resets = <&powerdown STIH416_SATA0_POWERDOWN>,
> + <&softreset STIH416_SATA0_SOFTRESET>;
> + reset-names = "pwr-dwn", "sw-rst";
> + clocks = <&CLK_S_ICN_REG_0>;
> + clock-names = "ahci_clk";
> + };
> --
> 1.8.3.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
