On Wed, Mar 12, 2014 at 06:17:07PM +0100, Hans de Goede wrote: > The ENMI needs to have the ack done *after* clearing the interrupt source, > otherwise we will get a spurious interrupt for each real interrupt. Switch > to the new handle_fasteoi_late_irq handler which gives us the desired > behavior. > > Signed-off-by: Hans de Goede <[email protected]> > --- > drivers/irqchip/irq-sun4i.c | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c > index 8a2fbee..4b1c874 100644 > --- a/drivers/irqchip/irq-sun4i.c > +++ b/drivers/irqchip/irq-sun4i.c > @@ -77,15 +77,22 @@ static void sun4i_irq_unmask(struct irq_data *irqd) > static struct irq_chip sun4i_irq_chip = { > .name = "sun4i_irq", > .irq_ack = sun4i_irq_ack, > + .irq_eoi = sun4i_irq_ack, /* For the ENMI */
Hmmm, I wonder if that actually does something.
There's been a patch floating around that I was sure was merged, but
apparently wasn't that remove sun4i_irq_ack, because the register we
were writing to are in read only, and it wasn't doing anything.
> .irq_mask = sun4i_irq_mask,
> .irq_unmask = sun4i_irq_unmask,
> + .flags = IRQCHIP_EOI_THREADED, /* Only affects the ENMI */
> };
>
> static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
> irq_hw_number_t hw)
> {
> - irq_set_chip_and_handler(virq, &sun4i_irq_chip,
> - handle_level_irq);
> + if (hw == 0) /* IRQ 0, the ENMI needs special handling */
> + irq_set_chip_and_handler(virq, &sun4i_irq_chip,
> + handle_fasteoi_late_irq);
> + else
> + irq_set_chip_and_handler(virq, &sun4i_irq_chip,
> + handle_level_irq);
> +
> set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
Could that solve the other NMI-related issue we have with Carlo's
patches?
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
signature.asc
Description: Digital signature
