On 20/03/2014 at 21:39:45 +0100, Sebastian Hesselbarth wrote : > This adds scu and general purpose registers device nodes required for > SMP on Berlin BG2 and BG2Q SoCs. The secondary CPUs will pick their jump > address from general purpose (SW generic) register 1. > > Signed-off-by: Sebastian Hesselbarth <[email protected]>
Acked-by: Alexandre Belloni <[email protected]> > --- > Cc: Rob Herring <[email protected]> > Cc: Pawel Moll <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Ian Campbell <[email protected]> > Cc: Kumar Gala <[email protected]> > Cc: Russell King <[email protected]> > Cc: Antoine Tenart <[email protected]> > Cc: Alexandre Belloni <[email protected]> > Cc: [email protected] > Cc: [email protected] > Cc: [email protected] > --- > arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++ > arch/arm/boot/dts/berlin2q.dtsi | 10 ++++++++++ > 2 files changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi > index 56a1af2f1052..4d85312dc17a 100644 > --- a/arch/arm/boot/dts/berlin2.dtsi > +++ b/arch/arm/boot/dts/berlin2.dtsi > @@ -72,6 +72,11 @@ > cache-level = <2>; > }; > > + scu: snoop-control-unit@ad0000 { > + compatible = "arm,cortex-a9-scu"; > + reg = <0xad0000 0x58>; > + }; > + > gic: interrupt-controller@ad1000 { > compatible = "arm,cortex-a9-gic"; > reg = <0xad1000 0x1000>, <0xad0100 0x0100>; > @@ -176,6 +181,11 @@ > }; > }; > > + generic-regs@ea0184 { > + compatible = "marvell,berlin-generic-regs", "syscon"; > + reg = <0xea0184 0x10>; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi > index 07452a7483fa..86d8a2c49f38 100644 > --- a/arch/arm/boot/dts/berlin2q.dtsi > +++ b/arch/arm/boot/dts/berlin2q.dtsi > @@ -87,6 +87,11 @@ > cache-level = <2>; > }; > > + scu: snoop-control-unit@ad0000 { > + compatible = "arm,cortex-a9-scu"; > + reg = <0xad0000 0x58>; > + }; > + > local-timer@ad0600 { > compatible = "arm,cortex-a9-twd-timer"; > reg = <0xad0600 0x20>; > @@ -183,6 +188,11 @@ > }; > }; > > + generic-regs@ea0110 { > + compatible = "marvell,berlin-generic-regs", "syscon"; > + reg = <0xea0110 0x10>; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > -- > 1.9.0 > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
