From: Hans de Goede <[email protected]> It is advisable to disable the NMI before registering the IRQ handler as registering the IRQ handler unmasks the IRQ on the GIC, so if U-Boot has left the NMI enabled and the NMI pin is active we will immediately get an interrupt before any driver has claimed the downstream interrupt of the NMI.
Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Carlo Caione <[email protected]> --- drivers/irqchip/irq-sunxi-nmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c index 1c8566c..12f547a 100644 --- a/drivers/irqchip/irq-sunxi-nmi.c +++ b/drivers/irqchip/irq-sunxi-nmi.c @@ -179,12 +179,12 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node, gc->chip_types[1].regs.type = reg_offs->ctrl; gc->chip_types[1].handler = handle_edge_irq; - irq_set_handler_data(irq, domain); - irq_set_chained_handler(irq, sunxi_sc_nmi_handle_irq); - sunxi_sc_nmi_write(gc, reg_offs->enable, 0); sunxi_sc_nmi_write(gc, reg_offs->pend, 0x1); + irq_set_handler_data(irq, domain); + irq_set_chained_handler(irq, sunxi_sc_nmi_handle_irq); + return 0; fail_irqd_remove: -- 1.8.4.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
