On 03/20/2014 10:14 PM, Santosh Shilimkar wrote:
On Thursday 20 March 2014 04:08 PM, Ivan Khoronzhuk wrote:
From: Murali Karicheri <[email protected]>
Sub page write doesn't work because of hw issue in controller found on
Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
don't seems to have any issue. So add "ti,keysone-nand" compatible
to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.
Cc: Brian Norris <[email protected]>
Cc: Warner Losh <[email protected]>
Cc: Santosh Shilimkar <[email protected]>
Signed-off-by: Murali Karicheri <[email protected]>
Signed-off-by: Ivan Khoronzhuk <[email protected]>
---
Acked-by: Santosh Shilimkar <[email protected]>
This patch is a result of discussion on patch v1:
https://lkml.org/lkml/2014/3/20/461
drivers/mtd/nand/davinci_nand.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 4615d79..b922c8e 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = {
#if defined(CONFIG_OF)
static const struct of_device_id davinci_nand_of_match[] = {
{.compatible = "ti,davinci-nand", },
+ {.compatible = "ti,keystone-nand", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
@@ -581,6 +582,11 @@ static struct davinci_nand_pdata
of_property_read_bool(pdev->dev.of_node,
"ti,davinci-nand-use-bbt"))
pdata->bbt_options = NAND_BBT_USE_FLASH;
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "ti,keystone-nand")) {
+ pdata->options |= NAND_NO_SUBPAGE_WRITE;
+ }
}
return dev_get_platdata(&pdev->dev);
Brian,
Could you pick up subj patch?
--
Regards,
Ivan Khoronzhuk
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
