Hi Shaik,
On 27.03.2014 12:07, Shaik Ameer Basha wrote:
From: Rahul Sharma <[email protected]>
This patch adds the missing clock register offsets for Exynos5420.
Signed-off-by: Rahul Sharma <[email protected]>
Signed-off-by: Shaik Ameer Basha <[email protected]>
---
drivers/clk/samsung/clk-exynos5420.c | 29 ++++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c
b/drivers/clk/samsung/clk-exynos5420.c
index 13f624d..3d0fb77 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -27,6 +27,9 @@
#define DIV_CPU1 0x504
#define GATE_BUS_CPU 0x700
#define GATE_SCLK_CPU 0x800
+#define CLKOUT_CMU_CPU 0xa00
+#define DIV_G2D 0x8500
+#define GATE_BUS_G2D 0x8700
#define GATE_IP_G2D 0x8800
#define CPLL_LOCK 0x10020
#define DPLL_LOCK 0x10030
@@ -39,7 +42,11 @@
#define CPLL_CON0 0x10120
#define DPLL_CON0 0x10128
#define EPLL_CON0 0x10130
+#define EPLL_CON1 0x10134
+#define EPLL_CON2 0x10138
#define RPLL_CON0 0x10140
+#define RPLL_CON1 0x10144
+#define RPLL_CON2 0x10148
#define IPLL_CON0 0x10150
#define SPLL_CON0 0x10160
#define VPLL_CON0 0x10170
@@ -57,10 +64,13 @@
#define SRC_FSYS 0x10244
#define SRC_PERIC0 0x10250
#define SRC_PERIC1 0x10254
+#define SRC_ISP 0x10270
#define SRC_TOP10 0x10280
#define SRC_TOP11 0x10284
#define SRC_TOP12 0x10288
-#define SRC_MASK_DISP10 0x1032c
+#define SRC_MASK_TOP2 0x10308
+#define SRC_MASK_DISP10 0x1032c
+#define SRC_MASK_MAU 0x10334
#define SRC_MASK_FSYS 0x10340
#define SRC_MASK_PERIC0 0x10350
#define SRC_MASK_PERIC1 0x10354
@@ -77,24 +87,41 @@
#define DIV_PERIC2 0x10560
#define DIV_PERIC3 0x10564
#define DIV_PERIC4 0x10568
+#define SCLK_DIV_ISP0 0x10580
+#define SCLK_DIV_ISP1 0x10584
+#define DIV2_RATIO0 0x10590
+#define DIV4_RATIO 0x105a0
#define GATE_BUS_TOP 0x10700
+#define GATE_BUS_GSCL0 0x10710
+#define GATE_BUS_GSCL1 0x10720
+#define GATE_BUS_DISP1 0x10728
+#define GATE_BUS_MFC 0x10734
+#define GATE_BUS_GEN 0x1073c
#define GATE_BUS_FSYS0 0x10740
+#define GATE_BUS_FSYS2 0x10748
+#define GATE_BUS_MSCL 0x1074C
#define GATE_BUS_PERIC 0x10750
#define GATE_BUS_PERIC1 0x10754
#define GATE_BUS_PERIS0 0x10760
#define GATE_BUS_PERIS1 0x10764
+#define GATE_BUS_NOC 0x10770
+#define GATE_TOP_SCLK_ISP 0x10870
#define GATE_IP_GSCL0 0x10910
#define GATE_IP_GSCL1 0x10920
#define GATE_IP_MFC 0x1092c
#define GATE_IP_DISP1 0x10928
#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
#define GATE_IP_MSCL 0x10970
#define GATE_TOP_SCLK_GSCL 0x10820
#define GATE_TOP_SCLK_DISP1 0x10828
#define GATE_TOP_SCLK_MAU 0x1083c
#define GATE_TOP_SCLK_FSYS 0x10840
#define GATE_TOP_SCLK_PERIC 0x10850
+#define TOP_SPARE2 0x10b08
#define BPLL_LOCK 0x20010
#define BPLL_CON0 0x20110
#define SRC_CDREX 0x20200
From this patch, it's hard to tell what is the use for those registers.
I think they should be added along with definitions that need them.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
