Add the SDHCI nodes for the Marvell Berlin BG2Q, using the berlin-sdhci driver.
Signed-off-by: Antoine Ténart <[email protected]> --- arch/arm/boot/dts/berlin2q.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 5925e6a16749..8f897d461460 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -67,6 +67,14 @@ clock-div = <3>; }; + sdio1clk: sdio1clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&syspll>; + clock-mult = <1>; + clock-div = <4>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -75,6 +83,38 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; + sdhci0: sdhci@ab0000 { + compatible = "marvell,berlin2q-sdhci"; + reg = <0xab0000 0x200>; + clocks = <&sdio1clk>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + broken-cd; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "marvell,berlin2q-sdhci"; + reg = <0xab0800 0x200>; + clocks = <&sdio1clk>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "marvell,berlin2q-sdhci"; + reg = <0xab1000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdio1clk>; + keep-power-in-suspend; + enable-sdio-wakeup; + broken-cd; + status = "disabled"; + }; + l2: l2-cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
