On Fri, Apr 18, 2014 at 11:01:27AM +0100, Russell King wrote:
> Add the HDMI DT configuration for the SolidRun HummingBoard and Cubox-i.
>
> Signed-off-by: Russell King <[email protected]>
> ---
> arch/arm/boot/dts/imx6dl-hummingboard.dts | 28 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 28 ++++++++++++++++++++++++++++
> 2 files changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts
> b/arch/arm/boot/dts/imx6dl-hummingboard.dts
> index 5bfae54fb780..d3095f58bf7b 100644
> --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
> +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
> @@ -67,6 +67,14 @@
> status = "okay";
> };
>
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
> + ddc-i2c-bus = <&i2c2>;
> + status = "okay";
> + crtcs = <&ipu1 0>;
The 'crtcs' should be dropped now, right?
> +};
> +
> &i2c1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
> @@ -82,6 +90,13 @@
> */
> };
>
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
> + status = "okay";
> +};
> +
> &iomuxc {
> hummingboard {
> pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
> @@ -97,6 +112,12 @@
> >;
> };
>
> + pinctrl_hummingboard_hdmi: hummingboard-hdmi {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
Is CEC already supported by imx-hdmi driver? Just a question.
Shawn
> pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> @@ -104,6 +125,13 @@
> >;
> };
>
> + pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> pinctrl_hummingboard_spdif: hummingboard-spdif {
> fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
> b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
> index c2a24888a276..5b9e7bceedaa 100644
> --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
> @@ -55,6 +55,21 @@
> };
> };
>
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
> + ddc-i2c-bus = <&i2c2>;
> + status = "okay";
> + crtcs = <&ipu1 0>;
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
> + status = "okay";
> +};
> +
> &i2c3 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
> @@ -69,6 +84,19 @@
>
> &iomuxc {
> cubox_i {
> + pinctrl_cubox_i_hdmi: cubox-i-hdmi {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
> + pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
> fsl,pins = <
> MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
> --
> 1.8.3.1
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
