Add required VDD 3.3V and VDD 1.0V regulator supplies to usb nodes.
Signed-off-by: Vivek Gautam <[email protected]>
---
arch/arm/boot/dts/exynos5250-snow.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
b/arch/arm/boot/dts/exynos5250-snow.dts
index fd9b3b3..21d1f31 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -214,12 +214,24 @@
enable-active-high;
};
+ usb@12000000 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+ };
+
phy@12100000 {
vbus-supply = <&usb3_vbus_reg>;
};
usb@12110000 {
samsung,vbus-gpio = <&gpx1 1 0>;
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+ };
+
+ usb@12120000 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
};
fixed-rate-clocks {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
