Lee,

On 04/03/2014 01:54 PM, Peter Ujfalusi wrote:
> In certain boards the source for the clk32k clock can be gated. In these
> boards the clk32k clock can be provided to the driver and it is going to be
> enabled/disabled when it is needed.
> If the clk32k clock is not provided the driver will assume that it is always
> running.

Do you want me to resend this patch, it seams to be missing from next still.

Thanks,
Péter

> 
> Signed-off-by: Peter Ujfalusi <[email protected]>
> ---
>  Documentation/devicetree/bindings/mfd/twl6040.txt |  2 ++
>  drivers/mfd/twl6040.c                             | 10 ++++++++++
>  include/linux/mfd/twl6040.h                       |  2 ++
>  3 files changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt 
> b/Documentation/devicetree/bindings/mfd/twl6040.txt
> index 0f5dd709d752..a41157b5d930 100644
> --- a/Documentation/devicetree/bindings/mfd/twl6040.txt
> +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
> @@ -19,6 +19,8 @@ Required properties:
>  
>  Optional properties, nodes:
>  - enable-active-high: To power on the twl6040 during boot.
> +- clocks: phandle to the clk32k clock provider
> +- clock-names: Must be "clk32k"
>  
>  Vibra functionality
>  Required properties:
> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> index 2e6504a8e1e3..12b314ea48dc 100644
> --- a/drivers/mfd/twl6040.c
> +++ b/drivers/mfd/twl6040.c
> @@ -291,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
>               if (twl6040->power_count++)
>                       goto out;
>  
> +             clk_prepare_enable(twl6040->clk32k);
> +
>               /* Allow writes to the chip */
>               regcache_cache_only(twl6040->regmap, false);
>  
> @@ -346,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
>  
>               twl6040->sysclk = 0;
>               twl6040->mclk = 0;
> +
> +             clk_disable_unprepare(twl6040->clk32k);
>       }
>  
>  out:
> @@ -644,6 +648,12 @@ static int twl6040_probe(struct i2c_client *client,
>  
>       i2c_set_clientdata(client, twl6040);
>  
> +     twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
> +     if (IS_ERR(twl6040->clk32k)) {
> +             dev_info(&client->dev, "clk32k is not handled\n");
> +             twl6040->clk32k = NULL;
> +     }
> +
>       twl6040->supplies[0].supply = "vio";
>       twl6040->supplies[1].supply = "v2v1";
>       ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
> diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
> index a69d16b30c18..8f9fc3d26e6d 100644
> --- a/include/linux/mfd/twl6040.h
> +++ b/include/linux/mfd/twl6040.h
> @@ -28,6 +28,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/mfd/core.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/clk.h>
>  
>  #define TWL6040_REG_ASICID           0x01
>  #define TWL6040_REG_ASICREV          0x02
> @@ -223,6 +224,7 @@ struct twl6040 {
>       struct regmap *regmap;
>       struct regmap_irq_chip_data *irq_data;
>       struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
> +     struct clk *clk32k;
>       struct mutex mutex;
>       struct mutex irq_mutex;
>       struct mfd_cell cells[TWL6040_CELLS];
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to