On 27 April 2014 15:29, Russell King <[email protected]> wrote: > The PMU device contains an interrupt controller, power control and > resets. The interrupt controller is a little sub-standard in that > there is no race free way to clear down pending interrupts, so we try > to avoid problems by reducing the window as much as possible, and > clearing as infrequently as possible. > > The interrupt support is implemented using an IRQ domain, and the > parent interrupt referenced in the standard DT way. > > The power domains and reset support is closely related - there is a > defined sequence for powering down a domain which is tightly coupled > with asserting the reset. Hence, it makes sense to group these two > together. > > This patch adds the core PMU driver: power domains must be defined in > the DT file in order to make use of them. The reset controller can > be referenced in the standard way for reset controllers.
Hi Russell, This patch would be simplified if this was based upon the not yet merged patchset from Tomasz Figa, "[PATCH v3 0/3] Generic Device Tree based power domain look-up". For example you would likely not need to add some of the marvel specific DT bindings, and you wouldn’t need the bus_notifiers to add devices to the power domain. I guess I just though it could be useful input to consider while going forward, unless you already knew. Kind regards Ulf Hansson -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
