Provide an option to get CD debounce time from DT
Signed-off-by: Balaji T K <[email protected]>
---
Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
drivers/mmc/core/host.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt
b/Documentation/devicetree/bindings/mmc/mmc.txt
index 9dce540..fae590b 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -17,6 +17,7 @@ Optional properties:
- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default
will be <1> if the property is absent.
- wp-gpios: Specify GPIOs for write protection, see gpio binding
+- cd-debounce-us: debounce time in microseconds for card detect gpio.
- cd-inverted: when present, polarity on the CD line is inverted. See the note
below for the case, when a GPIO is used for the CD line
- wp-inverted: when present, polarity on the WP line is inverted. See the note
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index fdea825..59cd3a0 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -313,6 +313,7 @@ int mmc_of_parse(struct mmc_host *host)
bool explicit_inv_wp, gpio_inv_wp = false;
enum of_gpio_flags flags;
int len, ret, gpio;
+ unsigned int debounce;
if (!host->parent || !host->parent->of_node)
return 0;
@@ -367,6 +368,9 @@ int mmc_of_parse(struct mmc_host *host)
if (of_find_property(np, "broken-cd", &len))
host->caps |= MMC_CAP_NEEDS_POLL;
+ if (of_property_read_u32(np, "cd-debounce-us", &debounce) < 0)
+ debounce = 0;
+
gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags);
if (gpio == -EPROBE_DEFER)
return gpio;
@@ -374,7 +378,7 @@ int mmc_of_parse(struct mmc_host *host)
if (!(flags & OF_GPIO_ACTIVE_LOW))
gpio_inv_cd = true;
- ret = mmc_gpio_request_cd(host, gpio, 0);
+ ret = mmc_gpio_request_cd(host, gpio, debounce);
if (ret < 0) {
dev_err(host->parent,
"Failed to request CD GPIO #%d: %d!\n",
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
