The Berlin SATA PHY drives the PHY related to the SATA interface and allows to power up/down each PHY independently. Add the corresponding documentation.
Signed-off-by: Antoine Ténart <[email protected]> --- Documentation/devicetree/bindings/phy/berlin-sata-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt new file mode 100644 index 000000000000..6d1cf5e11cfc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt @@ -0,0 +1,15 @@ +Berlin SATA PHY +--------------- + +Required properties: +- compatible: "marvell,berlin-sata-phy" +- #phy-cells: from the generic PHY bindings, must be 1 +- reg: address and length of the register + +Example: + sata_phy0: phy@f7e900a0 { + compatible = "marvell,berlin-sata-phy"; + reg = <0xf7e900a0 0x10>; + #phy-cells = <1>; + status = "okay"; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
