On Tue, May 13, 2014 at 02:57:30AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 05/12/2014 02:53 AM, Simon Horman wrote:
> 
> >>>Define the Henninger board dependent part of the QSPI device node.
> >>>Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.
> 
> >>>Signed-off-by: Sergei Shtylyov <[email protected]>
> 
> >>>---
> >>>This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon 
> >>>Horman's
> >>>'renesas.git' repo and SDHI0/2 DT support patch posted last weekend.
> 
> >>>  arch/arm/boot/dts/r8a7791-henninger.dts |   38 
> >>> ++++++++++++++++++++++++++++++++
> >>>  1 file changed, 38 insertions(+)
> 
> >>>Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> >>>===================================================================
> >>>--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
> >>>+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> >>[...]
> >>>@@ -158,3 +163,36 @@
> >>>   cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
> >>>   status = "okay";
> >>>  };
> >>>+
> >>>+&qspi {
> >>>+  pinctrl-0 = <&qspi_pins>;
> >>>+  pinctrl-names = "default";
> >>>+
> >>>+  status = "okay";
> >>>+
> >>>+  flash@0 {
> >>>+          #address-cells = <1>;
> >>>+          #size-cells = <1>;
> >>>+          compatible = "spansion,s25fl512s";
> >>>+          reg = <0>;
> >>>+          spi-max-frequency = <30000000>;
> >>>+          spi-tx-bus-width = <4>;
> >>>+          spi-rx-bus-width = <4>;
> >>>+          m25p,fast-read;
> >>>+
> >>>+          partition@0 {
> >>>+                  label = "loader_prg";
> >>>+                  reg = <0x00000000 0x00040000>;
> >>>+                  read-only;
> >>>+          };
> >>>+          partition@40000 {
> >>>+                  label = "user_prg";
> >>>+                  reg = <0x00040000 0x00400000>;
> >>>+                  read-only;
> 
> >>    Oops, there shouldn't be "read-only" here, I forgot to refresh
> >>the patch as I'm now seeing... too bad it's too late to resend now.
> >>:-(
> 
> >Could you send an incremental fix for me to queue up?
> 
>    Oops, I've rechecked and it should indeed be read-only, so the
> patch was correct. Sorry. :-)

Thanks for double checking.
I think we can safely do nothing for now :-)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to