On Monday, May 12, 2014 3:45 PM, Rahul Sharma wrote: > > From: Rahul Sharma <[email protected]> > > Enable display controller with timing information for 1080p > panel in Exynos5800 peach-pi board. > > Signed-off-by: Rahul Sharma <[email protected]>
Reviewed-by: Jingoo Han <[email protected]> Best regards, Jingoo Han > --- > arch/arm/boot/dts/exynos5800-peach-pi.dts | 36 > +++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts > b/arch/arm/boot/dts/exynos5800-peach-pi.dts > index 742655b..426705a 100644 > --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts > +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts > @@ -72,6 +72,13 @@ > samsung,pin-pud = <0>; > samsung,pin-drv = <0>; > }; > + > + dp_hpd_gpio: dp_hpd_gpio { > + samsung,pins = "gpx2-6"; > + samsung,pin-function = <0>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > }; > > &rtc { > @@ -121,6 +128,35 @@ > }; > }; > > +&dp { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&dp_hpd_gpio>; > + samsung,color-space = <0>; > + samsung,dynamic-range = <0>; > + samsung,ycbcr-coeff = <0>; > + samsung,color-depth = <1>; > + samsung,link-rate = <0x0a>; > + samsung,lane-count = <2>; > + samsung,hpd-gpio = <&gpx2 6 0>; > + > + display-timings { > + native-mode = <&timing1>; > + > + timing1: timing@1 { > + clock-frequency = <150660000>; > + hactive = <1920>; > + vactive = <1080>; > + hfront-porch = <60>; > + hback-porch = <172>; > + hsync-len = <80>; > + vback-porch = <25>; > + vfront-porch = <10>; > + vsync-len = <10>; > + }; > + }; > +}; > + > &hsi2c_9 { > status = "okay"; > clock-frequency = <400000>; > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
