Hi, Ulf.
If we know whether card is eMMC or SD, then just use only cap-mmc-highspeed or
cap-sd-highspeed, isn't?
In exynos series's case, i know the card is eMMC or SD, so use one of them.
But i didn't know whether card is eMMC or SD at other SoC, so added all
property.
Do you think it need to add all property?
snip[...]
>> };
>>
>> mmc@12220000 {
>> num-slots = <1>;
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <2 3>;
>> samsung,dw-mshc-ddr-timing = <1 2>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - wp-gpios = <&gpc2 1 0>;
>> - };
>> + bus-width = <4>;
>> + wp-gpios = <&gpc2 1 0>;
>
> cap-sd-highspeed?
> cap-mmc-highspeed?
Sorry, missed.
Best Regards,
Jaehoon Chung
>
>> };
>>
>> mmc@12230000 {
>> num-slots = <1>;
>> - supports-highspeed;
>> - broken-cd;
>> card-detect-delay = <200>;
>> + broken-cd;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <2 3>;
>> samsung,dw-mshc-ddr-timing = <1 2>;
>> /* See board-specific dts files for pin setup */
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - };
>> + bus-width = <4>;
>> + cap-sd-highspeed;
>
> cap-mmc-highspeed?
>
>> };
>>
>> spi_1: spi@12d30000 {
>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> index a794a70..e00ffc6 100644
>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> @@ -282,7 +282,6 @@
>> mmc@12200000 {
>> status = "okay";
>> num-slots = <1>;
>> - supports-highspeed;
>> broken-cd;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> @@ -290,29 +289,22 @@
>> samsung,dw-mshc-ddr-timing = <1 2>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <8>;
>> - };
>> + bus-width = <8>;
>> + cap-mmc-highspeed;
>
> cap-sd-highspeed?
>
>> };
>>
>> mmc@12220000 {
>> status = "okay";
>> num-slots = <1>;
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <2 3>;
>> samsung,dw-mshc-ddr-timing = <1 2>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - disable-wp;
>> - };
>> + bus-width = <4>;
>> + disable-wp;
>> + cap-sd-highspeed;
>
> cap-mmc-highspeed?
>
>> };
>>
>> spi_1: spi@12d30000 {
>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
>> b/arch/arm/boot/dts/exynos5250-snow.dts
>> index 1ce1088..2245278 100644
>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
>> @@ -190,10 +190,8 @@
>> */
>> mmc@12230000 {
>> status = "okay";
>> - slot@0 {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
>> - };
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
>> };
>>
>> usb@12110000 {
>> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> index 80a3bf4..752715a 100644
>> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
>> @@ -40,7 +40,6 @@
>> mmc@12200000 {
>> status = "okay";
>> broken-cd;
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <0 4>;
>> @@ -48,16 +47,12 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>> vmmc-supply = <&ldo10_reg>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <8>;
>> - };
>> + bus-width = <8>;
>> + cap-mmc-highspeed;
>
> cap-sd-highspeed?
>
>> };
>>
>> mmc@12220000 {
>> status = "okay";
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <2 3>;
>> @@ -65,11 +60,8 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> vmmc-supply = <&ldo10_reg>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - };
>> + bus-width = <4>;
>> + cap-sd-highspeed;
>
> cap-mmc-highspeed?
>
>> };
>>
>> hsi2c_4: i2c@12CA0000 {
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index 6910485..7f5e35b 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -71,34 +71,26 @@
>> mmc@12200000 {
>> status = "okay";
>> broken-cd;
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <0 4>;
>> samsung,dw-mshc-ddr-timing = <0 2>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <8>;
>> - };
>> + bus-width = <8>;
>> + cap-mmc-highspeed;
>
> cap-sd-highspeed?
>
>> };
>>
>> mmc@12220000 {
>> status = "okay";
>> - supports-highspeed;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <2 3>;
>> samsung,dw-mshc-ddr-timing = <1 2>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - };
>> + bus-width = <4>;
>> + cap-sd-highspeed;
>
> cap-mmc-highspeed?
>
>> };
>>
>> dp-controller@145B0000 {
>> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
>> b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
>> index 035df40..0e618d5 100644
>> --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
>> +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
>> @@ -58,12 +58,8 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
>> vmmc-supply = <&vcc_sd0>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - disable-wp;
>> - };
>> + bus-width = <4>;
>> + disable-wp;
>> };
>>
>> dwmmc@10218000 { /* wifi */
>> @@ -73,12 +69,8 @@
>>
>> pinctrl-names = "default";
>> pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - disable-wp;
>> - };
>> + bus-width = <4>;
>> + disable-wp;
>> };
>>
>> gpio-keys {
>> diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi
>> b/arch/arm/boot/dts/socfpga_arria5.dtsi
>> index 6c87b70..1da0e81 100644
>> --- a/arch/arm/boot/dts/socfpga_arria5.dtsi
>> +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
>> @@ -29,12 +29,13 @@
>>
>> dwmmc0@ff704000 {
>> num-slots = <1>;
>> - supports-highspeed;
>> - broken-cd;
>>
>> slot@0 {
>> reg = <0>;
>> bus-width = <4>;
>> + broken-cd;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> index ca41b0e..c4ebf65 100644
>> --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> @@ -30,13 +30,10 @@
>>
>> dwmmc0@ff704000 {
>> num-slots = <1>;
>> - supports-highspeed;
>> broken-cd;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - };
>> + bus-width = <4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> };
>>
>> ethernet@ff702000 {
>> diff --git a/arch/arm/boot/dts/socfpga_vt.dts
>> b/arch/arm/boot/dts/socfpga_vt.dts
>> index 87d6f75..07e7206 100644
>> --- a/arch/arm/boot/dts/socfpga_vt.dts
>> +++ b/arch/arm/boot/dts/socfpga_vt.dts
>> @@ -43,13 +43,10 @@
>>
>> dwmmc0@ff704000 {
>> num-slots = <1>;
>> - supports-highspeed;
>> broken-cd;
>> -
>> - slot@0 {
>> - reg = <0>;
>> - bus-width = <4>;
>> - };
>> + bus-width = <4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> };
>>
>> ethernet@ff700000 {
>> --
>> 1.7.9.5
>>
>
> Kind regards
> Ulf Hansson
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
