Define the Henninger board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices.
Signed-off-by: Sergei Shtylyov <[email protected]> --- arch/arm/boot/dts/r8a7791-henninger.dts | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts +++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts @@ -125,6 +125,11 @@ "msiof0_tx"; renesas,function = "msiof0"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -181,6 +186,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi { @@ -230,3 +248,20 @@ spi-cpha; }; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
