Add documentation for pxa_camera host interface.
Signed-off-by: Robert Jarzmik <[email protected]>
---
.../devicetree/bindings/media/pxa-camera.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/pxa-camera.txt
diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt
b/Documentation/devicetree/bindings/media/pxa-camera.txt
new file mode 100644
index 0000000..568b63b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/pxa-camera.txt
@@ -0,0 +1,40 @@
+Marvell PXA camera host interface
+
+Required properties:
+ - compatible: Should be "mrvl,pxa_camera"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - any required generic properties defined in video-interfaces.txt
+
+Optional properties:
+ - mclk_10khz: host interface is driving MCLK, and MCLK rate is mclk_10khz *
+ 10000 Hz.
+
+Example:
+
+ pxa_camera: pxa_camera@50000000 {
+ compatible = "mrvl,pxa_camera";
+ reg = <0x50000000 0x1000>;
+ interrupts = <33>;
+
+ clocks = <&pxa2xx_clks 24>;
+ clock-names = "camera";
+ status = "okay";
+
+ mclk_10khz = <5000>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ qci: endpoint@0 {
+ reg = <0>; /* Local endpoint # */
+ remote-endpoint = <&mt9m111_1>;
+ bus-width = <8>; /* Used data lines */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
