Hello. On 07/02/2014 02:14 PM, Mark Rutland wrote:
Add support of the device tree probing for the Renesas R-Car CAN controllers documenting the device tree bindings as necessary.
[...]
Signed-off-by: Sergei Shtylyov <[email protected]>
[...]
Index: net-next/Documentation/devicetree/bindings/net/can/rcar_can.txt =================================================================== --- /dev/null +++ net-next/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -0,0 +1,40 @@
[...]
+- reg: physical base address and size of the R-Car CAN register map. +- interrupts: interrupt specifier for the sole interrupt. +- clocks: phandle and clock specifier for the R-Car CAN clock input. +- pinctrl-0: pin control group to be used for this controller. +- pinctrl-names: must be "default". + +Optional properties: +- clock-select: R-Car CAN Clock Source Select. Valid values are: + <0x0> (default) : Peripheral clock (clkp1) + <0x1> : Peripheral clock (clkp2) + <0x3> : Externally input clock
What's this for, and how does this interact with the single clock listed above?
That's supposed to select a source for the CAN bus clock. Looking back at the driver, it seems to actually only support the value of 0. That's something we haven't given enough attention to clearly... :-/
THanks, Mark.
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
