* Nishanth Menon <[email protected]> [140605 18:12]:
> From: "Andrii.Tseglytskyi" <[email protected]>
>
> Add ABB device nodes for OMAP5 family of devices. Data is based on
> final production OMAP543x Technical Reference Manual revision Z (April 2013).
> Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014).
>
> [[email protected]: co-developer and updates to latest documentation]
> Signed-off-by: Nishanth Menon <[email protected]>
> Signed-off-by: Andrii.Tseglytskyi <[email protected]>
> ---
> Original patch (v1): https://patchwork.kernel.org/patch/3555191/
>
> Rest of the series was accepted, however, I had to drop this
> previously to ensure that the data we introduce is compatible with
> production samples and existing pre-production samples on various
> OMAP5uEVMs already in circulation.
Is this OK to queue for v3.17 or do we need it for the -rc cycle?
Regards,
Tony
> arch/arm/boot/dts/omap5.dtsi | 60
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index a4ed549..8eee6fb 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -985,6 +985,66 @@
> dma-names = "audio_tx";
> };
> };
> +
> + abb_mpu: regulator-abb-mpu {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mpu";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
> + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80>;
> + /* LDOVBBMPU_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMPU_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 1060000 0 0x0 0 0x02000000 0x01F00000
> + 1250000 0 0x4 0 0x02000000 0x01F00000
> + >;
> + };
> +
> + abb_mm: regulator-abb-mm {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mm";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
> + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80000000>;
> + /* LDOVBBMM_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMM_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 1025000 0 0x0 0 0x02000000 0x01F00000
> + 1120000 0 0x4 0 0x02000000 0x01F00000
> + >;
> + };
> };
> };
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
