On Tuesday, July 08, 2014 9:31 PM, Kishon Vijay Abraham I wrote:
>
> Hi Mohit, Jingoo,
>
> On Wednesday 25 June 2014 11:26 PM, Kishon Vijay Abraham I wrote:
> > In DRA7, the cpu sees 32bit address, but the pcie controller can see only
> > 28bit
> > address. So whenever the cpu issues a read/write request, the 4 most
> > significant bits are used by L3 to determine the target controller.
> > For example, the cpu reserves 0x2000_0000 - 0x2FFF_FFFF for PCIe controller
> > but
> > the PCIe controller will see only (0x000_0000 - 0xFFF_FFF). So for
> > programming
> > the outbound translation window the *base* should be programmed as
> > 0x000_0000.
> > Whenever we try to write to say 0x2000_0000, it will be translated to
> > whatever
> > we have programmed in the translation window with base as 0x000_0000.
> >
> > This is needed when the dt node is modelled something like below
> > axi {
> > compatible = "simple-bus";
> > #size-cells = <1>;
> > #address-cells = <1>;
> > ranges = <0x0 0x20000000 0x10000000 // 28-bit bus
> > 0x51000000 0x51000000 0x3000>;
> > pcie@51000000 {
> > reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
> > reg-names = "config", "ti_conf", "rc_dbics";
> > #address-cells = <3>;
> > #size-cells = <2>;
> > ranges = <0x81000000 0 0 0x03000 0 0x00010000
> > 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
> > };
> > };
> >
> > Here the CPU address for configuration space is 0x20013000 and the
> > controller
> > address for configuration space is 0x13000. The controller address should be
> > used while programming the ATU (in order for translation to happen properly
> > in
> > DRA7xx).
>
> Are you okay with this patch? Can you give your Reviewed-by/Acked-by?
Sorry, I cannot understand fully what this patch does. :-(
However, I have some questions as below.
1. io_mod_addr
The 'io_mod_addr' variable is not used. Then, how about removing
'io_mod_addr' from this patch?
2. ranges
In the case of Exynos PCIe, there is no limitation such as 28bit for
access. Then, when there is no 'ranges' property in DT file, is there
no side effect? I mean the compatibility with other SoC's PCIe drivers.
3. _addr post fix
How about renaming 'cfg0_mod_addr', 'mem_mod_addr' as below?
u64 cfg0_base;
+ u64 cfg0_mod_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
+ u64 cfg1_mod_base;
void __iomem *va_cfg1_base;
u64 io_base;
+ u64 io_mod_base;
u64 mem_base;
+ u64 mem_mod_base;
Best regards,
Jingoo Han
>
> Cheers
> Kishon
> >
> > Cc: Jason Gunthorpe <[email protected]>
> > Cc: Bjorn Helgaas <[email protected]>
> > Cc: Mohit Kumar <[email protected]>
> > Cc: Jingoo Han <[email protected]>
> > Cc: Marek Vasut <[email protected]>
> > Cc: Arnd Bergmann <[email protected]>
> > Signed-off-by: Kishon Vijay Abraham I <[email protected]>
> > ---
> > drivers/pci/host/pcie-designware.c | 49
> > ++++++++++++++++++++++++++++--------
> > drivers/pci/host/pcie-designware.h | 4 +++
> > 2 files changed, 42 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/pci/host/pcie-designware.c
> > b/drivers/pci/host/pcie-designware.c
> > index 0b7b455..11aba6d 100644
> > --- a/drivers/pci/host/pcie-designware.c
> > +++ b/drivers/pci/host/pcie-designware.c
> > @@ -401,8 +401,15 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > struct of_pci_range range;
> > struct of_pci_range_parser parser;
> > struct resource *cfg_res;
> > - u32 val;
> > - int i;
> > + u32 val, na, ns;
> > + const __be32 *addrp;
> > + int i, index;
> > +
> > + /* Find the address cell size and the number of cells in order to get
> > + * the untranslated address.
> > + */
> > + of_property_read_u32(np, "#address-cells", &na);
> > + ns = of_n_size_cells(np);
> >
> > cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
> > if (cfg_res) {
> > @@ -410,6 +417,12 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > pp->config.cfg1_size = resource_size(cfg_res)/2;
> > pp->cfg0_base = cfg_res->start;
> > pp->cfg1_base = cfg_res->start + pp->config.cfg0_size;
> > +
> > + /* Find the untranslated configuration space address */
> > + index = of_property_match_string(np, "reg-names", "config");
> > + addrp = of_get_address(np, index, false, false);
> > + pp->cfg0_mod_addr = of_read_number(addrp, ns);
> > + pp->cfg1_mod_addr = pp->cfg0_mod_addr + pp->config.cfg0_size;
> > } else {
> > dev_err(pp->dev, "missing *config* reg space\n");
> > }
> > @@ -435,12 +448,20 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > pp->config.io_size = resource_size(&pp->io);
> > pp->config.io_bus_addr = range.pci_addr;
> > pp->io_base = range.cpu_addr;
> > +
> > + /* Find the untranslated IO space address */
> > + pp->io_mod_addr = of_read_number(parser.range -
> > + parser.np + na, ns);
> > }
> > if (restype == IORESOURCE_MEM) {
> > of_pci_range_to_resource(&range, np, &pp->mem);
> > pp->mem.name = "MEM";
> > pp->config.mem_size = resource_size(&pp->mem);
> > pp->config.mem_bus_addr = range.pci_addr;
> > +
> > + /* Find the untranslated MEM space address */
> > + pp->mem_mod_addr = of_read_number(parser.range -
> > + parser.np + na, ns);
> > }
> > if (restype == 0) {
> > of_pci_range_to_resource(&range, np, &pp->cfg);
> > @@ -448,6 +469,12 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > pp->config.cfg1_size = resource_size(&pp->cfg)/2;
> > pp->cfg0_base = pp->cfg.start;
> > pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
> > +
> > + /* Find the untranslated configuration space address */
> > + pp->cfg0_mod_addr = of_read_number(parser.range -
> > + parser.np + na, ns);
> > + pp->cfg1_mod_addr = pp->cfg0_mod_addr +
> > + pp->config.cfg0_size;
> > }
> > }
> >
> > @@ -522,9 +549,9 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port
> > *pp, u32 busdev)
> > /* Program viewport 0 : OUTBOUND : CFG0 */
> > dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
> > PCIE_ATU_VIEWPORT);
> > - dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
> > - dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
> > - dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
> > + dw_pcie_writel_rc(pp, pp->cfg0_mod_addr, PCIE_ATU_LOWER_BASE);
> > + dw_pcie_writel_rc(pp, (pp->cfg0_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
> > + dw_pcie_writel_rc(pp, pp->cfg0_mod_addr + pp->config.cfg0_size - 1,
> > PCIE_ATU_LIMIT);
> > dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
> > dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
> > @@ -538,9 +565,9 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port
> > *pp, u32 busdev)
> > dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
> > PCIE_ATU_VIEWPORT);
> > dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
> > - dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
> > - dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
> > - dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
> > + dw_pcie_writel_rc(pp, pp->cfg1_mod_addr, PCIE_ATU_LOWER_BASE);
> > + dw_pcie_writel_rc(pp, (pp->cfg1_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
> > + dw_pcie_writel_rc(pp, pp->cfg1_mod_addr + pp->config.cfg1_size - 1,
> > PCIE_ATU_LIMIT);
> > dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
> > dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
> > @@ -553,9 +580,9 @@ static void dw_pcie_prog_viewport_mem_outbound(struct
> > pcie_port *pp)
> > dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
> > PCIE_ATU_VIEWPORT);
> > dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
> > - dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
> > - dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
> > - dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
> > + dw_pcie_writel_rc(pp, pp->mem_mod_addr, PCIE_ATU_LOWER_BASE);
> > + dw_pcie_writel_rc(pp, (pp->mem_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
> > + dw_pcie_writel_rc(pp, pp->mem_mod_addr + pp->config.mem_size - 1,
> > PCIE_ATU_LIMIT);
> > dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
> > dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
> > diff --git a/drivers/pci/host/pcie-designware.h
> > b/drivers/pci/host/pcie-designware.h
> > index 77f592f..13828f8 100644
> > --- a/drivers/pci/host/pcie-designware.h
> > +++ b/drivers/pci/host/pcie-designware.h
> > @@ -36,11 +36,15 @@ struct pcie_port {
> > u8 root_bus_nr;
> > void __iomem *dbi_base;
> > u64 cfg0_base;
> > + u64 cfg0_mod_addr;
> > void __iomem *va_cfg0_base;
> > u64 cfg1_base;
> > + u64 cfg1_mod_addr;
> > void __iomem *va_cfg1_base;
> > u64 io_base;
> > + u64 io_mod_addr;
> > u64 mem_base;
> > + u64 mem_mod_addr;
> > struct resource cfg;
> > struct resource io;
> > struct resource mem;
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
