Hi,
On 08/07/14 11:15, Daniel Drake wrote:
> On Fri, Jul 4, 2014 at 2:13 PM, Sylwester Nawrocki
> <[email protected]> wrote:
>> This patch adds the sound subsystem driver for Odroid-X2 and
>> Odroid-U3 boards. The codec works in I2S master mode; there
>> are two separate audio routing paths defined, as there are
>> differences in the signal routing between the X2 and U3 boards,
>> i.e. U3 uses single jack for headphones and microphone.
>>
>> Signed-off-by: Chen Zhen <[email protected]>
>> Signed-off-by: Sylwester Nawrocki <[email protected]>
>
> Testing on ODROID-U2, v3 is not quite working for me, but v2 of the
> patch was fine.
> I boot up, run:
> # speaker-test -c 2 -t wav
>
> As soon as I hear the word "front" I press ctrl+c and then run the
> command again.
> Now the command hangs with no audible output.
>
> Any ideas? Let me know if you have trouble reproducing.
Thanks the feedback, we have also noticed this issue.
It sounds like a bug in the Samsung I2S driver, which sets the
CDCLK pin to input mode in the i2s_shutdown callback and never
restores it. AFAICS this setting should not be lost after a call
to struct soc_snd_dai_ops::shutdown().
I'm going will prepare a proper patch soon, until then you could
try and see if this fixes the problem for you:
---8<---
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index d80121e..42c4f3e 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -724,10 +724,6 @@ static void i2s_shutdown(struct snd_pcm_substream
*substream,
spin_unlock_irqrestore(&lock, flags);
- /* Gate CDCLK by default */
- if (!is_opened(other))
- i2s_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
- 0, SND_SOC_CLOCK_IN);
}
--->8---
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
