Use the newly ammended dw_8250 clock binding to define both the baudclk as well as the pclk supplying the ip.
Signed-off-by: Heiko Stuebner <[email protected]> --- arch/arm/boot/dts/rk3xxx.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index d3fa4d1..989c337 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -75,7 +75,8 @@ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; status = "disabled"; }; @@ -85,7 +86,8 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <1>; - clocks = <&cru SCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; status = "disabled"; }; @@ -207,7 +209,8 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <1>; - clocks = <&cru SCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; status = "disabled"; }; @@ -217,7 +220,8 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <1>; - clocks = <&cru SCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; status = "disabled"; }; }; -- 2.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
