On Fri, Aug 01, 2014 at 07:15:41AM +0000, Priebe, Sebastian wrote:
> Hello Sascha,
>
> thanks for your answer.
> We are using an imx35 cpu and our CPLD is in fact connected via weim (CS1).
> Though I created the following device node in our dts:
> &weim {
> pinctrl-names = "default";
> status = "okay";
>
> pld@1,0 {
> compatible = "roche,hbm-pld";
> reg = <1 0x00000000 0x0001000>;
> fsl,weim-cs-timing = <0x0 0x0 0x0>; /* don't know what to put
> here */
> };
> };
>
> And I turned the CPLD driver into a platform driver. But I don't get the
> resource in probe:
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0) returns NULL.
>
> In our platform code we had:
> static struct resource hbm_pld_resource_data = {
> .start = 0xA8000000,
> .end = 0xA8000000 + 0x1000 - 1,
> .flags = IORESOURCE_MEM,
> };
Why do you manually register a platform_device? You should add the CPLD
device to the device tree instead.
>
> And for the setting of CS1:
> __raw_writel((0x22 << 8), MX35_IO_ADDRESS(MX3x_WEIM_BASE_ADDR) + 0x10);
> __raw_writel(((0x0a << 28) | (0x06 << 12) | (0x03 << 8) | (0x04 << 4) | (0x01
> << 0)), MX35_IO_ADDRESS(MX3x_WEIM_BASE_ADDR) + 0x14);
>
> Where do I put this in the device tree?
In the fsl,weim-cs-timing property. See
Documentation/devicetree/bindings/bus/imx-weim.txt
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
