During calibration, set the "internal reference level for drive pull-down" to the value specified in the tegra TRM.
Signed-off-by: Sean Paul <[email protected]> --- drivers/gpu/host1x/mipi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c index 80578dc..84ed422 100644 --- a/drivers/gpu/host1x/mipi.c +++ b/drivers/gpu/host1x/mipi.c @@ -235,6 +235,8 @@ int tegra_mipi_calibrate(struct tegra_mipi_device *device) value |= MIPI_CAL_BIAS_PAD_E_VCLAMP_REF; tegra_mipi_writel(device->mipi, value, MIPI_CAL_BIAS_PAD_CFG0); + tegra_mipi_writel(device->mipi, 0x20000, MIPI_CAL_BIAS_PAD_CFG1); + value = tegra_mipi_readl(device->mipi, MIPI_CAL_BIAS_PAD_CFG2); value &= ~MIPI_CAL_BIAS_PAD_PDVREG; tegra_mipi_writel(device->mipi, value, MIPI_CAL_BIAS_PAD_CFG2); -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
