From: Ben Dooks <[email protected]> Add the Lager board specific device node part for VIN1 (composite video in); add the device node for Analog Devices ADV7180 video decoder to IIC2 bus. Add the necessary subnodes to interconnect VIN1 and ADV7180 devices.
Signed-off-by: Ben Dooks <[email protected]> [Sergei: rebased, edited changelog and summary] Signed-off-by: Sergei Shtylyov <[email protected]> --- Changes in version 5: - edited changelog and summary; - resolved reject, refreshed patch. arch/arm/boot/dts/r8a7790-lager.dts | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts +++ renesas/arch/arm/boot/dts/r8a7790-lager.dts @@ -234,6 +234,11 @@ renesas,groups = "usb2"; renesas,function = "usb2"; }; + + vin1_pins: vin { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -370,6 +375,19 @@ status = "ok"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; }; &iic3 { @@ -405,3 +423,21 @@ pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
