Hi Bartlomiej,
On 08/25/2014 07:15 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Monday, August 25, 2014 04:30:23 PM Chanwoo Choi wrote:
>> This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
>> has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
>> shift/mask bit operation to set RELOAD feature instead of static value.
>>
>> Signed-off-by: Chanwoo Choi <[email protected]>
>> Acked-by: Kyungmin Park <[email protected]>
>> Cc: Zhang Rui <[email protected]>
>> Cc: Eduardo Valentin <[email protected]>
>> Cc: Amit Daniel Kachhap <[email protected]>
>> Reviewed-by: Amit Daniel Kachhap <[email protected]>
>> ---
>> drivers/thermal/samsung/exynos_thermal_common.h | 1 +
>> drivers/thermal/samsung/exynos_tmu.c | 23 ++++++++++++++++++++---
>> drivers/thermal/samsung/exynos_tmu.h | 9 +++++++--
>> drivers/thermal/samsung/exynos_tmu_data.c | 5 ++++-
>> drivers/thermal/samsung/exynos_tmu_data.h | 3 +++
>> 5 files changed, 35 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h
>> b/drivers/thermal/samsung/exynos_thermal_common.h
>> index 3eb2ed9..b211976 100644
>> --- a/drivers/thermal/samsung/exynos_thermal_common.h
>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>> @@ -28,6 +28,7 @@
>> #define MAX_TRIP_COUNT 8
>> #define MAX_COOLING_DEVICE 4
>> #define MAX_THRESHOLD_LEVS 5
>> +#define MAX_TRIMINFO_CTRL_REG 2
>>
>> #define ACTIVE_INTERVAL 500
>> #define IDLE_INTERVAL 10000
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c
>> b/drivers/thermal/samsung/exynos_tmu.c
>> index acbff14..7234f38 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -147,7 +147,7 @@ static int exynos_tmu_initialize(struct platform_device
>> *pdev)
>> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>> struct exynos_tmu_platform_data *pdata = data->pdata;
>> const struct exynos_tmu_registers *reg = pdata->registers;
>> - unsigned int status, trim_info = 0, con;
>> + unsigned int status, trim_info = 0, con, ctrl;
>> unsigned int rising_threshold = 0, falling_threshold = 0;
>> int ret = 0, threshold_code, i, trigger_levs = 0;
>>
>> @@ -164,8 +164,25 @@ static int exynos_tmu_initialize(struct platform_device
>> *pdev)
>> }
>> }
>>
>> - if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>> - __raw_writel(1, data->base + reg->triminfo_ctrl);
>> + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
>> + if (reg->triminfo_ctrl_count > MAX_TRIMINFO_CTRL_REG) {
>
> Please remove this check and MAX_TRIMINFO_CTRL_REG define.
>
> We do not want such runtime checks for development time errors.
OK, I'll remove it.
>
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + for (i = 0; i < reg->triminfo_ctrl_count; i++) {
>> + if (pdata->triminfo_reload[i]) {
>> + ctrl = readl(data->base +
>> + reg->triminfo_ctrl[i]);
>> + ctrl &= ~(reg->triminfo_reload_mask <<
>> + reg->triminfo_reload_shift);
>> + ctrl |= pdata->triminfo_reload[i] <<
>> + reg->triminfo_reload_shift;
>
> triminfo_reload_shift and triminfo_reload_mask variables have always
> the same values when this code is run so there is no need for them.
I don't understand. Do you mean that timinfo_reload_{shift/mask} variable is
un-needed?
If you possible, I need more detailed comment.
>
> They should be added only when needed instead of doing it now.
>
>> + __raw_writel(ctrl, data->base +
>> + reg->triminfo_ctrl[i]);
>> + }
>> + }
>> + }
>>
>> if (pdata->cal_mode == HW_MODE)
>> goto skip_calib_data;
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h
>> b/drivers/thermal/samsung/exynos_tmu.h
>> index 1b4a644..d7674ad 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -85,8 +85,11 @@ enum soc_type {
>> * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data
>> reg.
>> * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data
>> reg.
>> * @triminfo_ctrl: trim info controller register.
>> + * @triminfo_ctrl_count: the number of trim info controller register.
>> * @triminfo_reload_shift: shift of triminfo reload enable bit in
>> triminfo_ctrl
>> reg.
>> + * @triminfo_reload_mask: mask of triminfo reload enable bit in
>> triminfo_ctrl
>> + reg.
>> * @tmu_ctrl: TMU main controller register.
>> * @test_mux_addr_shift: shift bits of test mux address.
>> * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl
>> register.
>> @@ -151,9 +154,10 @@ struct exynos_tmu_registers {
>> u32 triminfo_25_shift;
>> u32 triminfo_85_shift;
>>
>> - u32 triminfo_ctrl;
>> - u32 triminfo_ctrl1;
>> + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
>> + u32 triminfo_ctrl_count;
>> u32 triminfo_reload_shift;
>> + u32 triminfo_reload_mask;
>>
>> u32 tmu_ctrl;
>> u32 test_mux_addr_shift;
>> @@ -295,6 +299,7 @@ struct exynos_tmu_platform_data {
>> u8 second_point_trim;
>> u8 default_temp_offset;
>> u8 test_mux;
>> + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
>>
>> enum calibration_type cal_type;
>> enum calibration_mode cal_mode;
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c
>> b/drivers/thermal/samsung/exynos_tmu_data.c
>> index aa8e0de..754c638 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -184,8 +184,10 @@ static const struct exynos_tmu_registers
>> exynos4412_tmu_registers = {
>> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>> .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>> .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
>> + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON,
>> + .triminfo_ctrl_count = 1,
>> .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
>> + .triminfo_reload_mask = EXYNOS_TRIMINFO_RELOAD_MASK,
>> .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>> .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>> .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>> @@ -252,6 +254,7 @@ static const struct exynos_tmu_registers
>> exynos4412_tmu_registers = {
>> .temp_level = 95, \
>> }, \
>> .freq_tab_count = 2, \
>> + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
>> .registers = &exynos4412_tmu_registers, \
>> .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>> TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h
>> b/drivers/thermal/samsung/exynos_tmu_data.h
>> index 401bab7..87454f63 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -64,6 +64,9 @@
>> #define EXYNOS_EMUL_CON 0x80
>>
>> #define EXYNOS_TRIMINFO_RELOAD_SHIFT 0
>> +#define EXYNOS_TRIMINFO_RELOAD_MASK 0x1
>> +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
>> +#define EXYNOS_TRIMINFO_RELOAD_DISABLE 0
>
> This define is never used please remove it.
OK, I'll remove it. Thanks.
Beset Regards,
Chanwoo CHoi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
