Hi Kishon,
Thanks for reviewing :-)
> > +On STiH410, we have to use the DWC3 port#2 with a picoPHY to manage USB2
> > +devices. The USB2 Controller will use the ports #0 and #1.
> > +
> > +This is to document the DT parameters to be passed from the blob in that
> > case.
> > +
> > +Required properties:
> > +- compatible : should be "st,stih407-usb2-phy"
>
> If STiH410 also uses the same driver then you should add a new compatibility
> value for it.
I will remove the reference to stih410 in V2, as currently it is not supported
upstream, and I'm not sure what ST's plans are regarding upstreaming it. If/
when it is upstreamed, we can add this and a compabible property back in.
<snip>
> > +
> > +usb2_picophy0: usbpicophy@0 {
> usbpicophy@f8 since you have a reg property ;-)
will fix in V2
>
> > + compatible = "st,stih407-usb2-phy";
> > + reg = <0xf8 0x04>, /* syscfg 5062 */
> > + <0xf4 0x04>; /* syscfg 5061 */
> > + reg-names = "param",
> > + "ctrl";
> > + #phy-cells = <0>;
>
> alignment seems to have gone wrong here.
Will fix in v2
regards,
Peter.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
