The labels on the spidev nodes are not used and not required, so
remove them. The TX28 supports 3 chipselects on the SPI
interface. Make all those chipselects available to the user.

Signed-off-by: Lothar Waßmann <[email protected]>
---
 arch/arm/boot/dts/imx28-tx28.dts |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index f947fbb..4e790c2 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -619,17 +619,23 @@
        clock-frequency = <57600000>;
        status = "okay";
 
-       spidev0: spi@0 {
+       spi@0 {
                compatible = "spidev";
                reg = <0>;
                spi-max-frequency = <57600000>;
        };
 
-       spidev1: spi@1 {
+       spi@1 {
                compatible = "spidev";
                reg = <1>;
                spi-max-frequency = <57600000>;
        };
+
+       spi@2 {
+               compatible = "spidev";
+               reg = <2>;
+               spi-max-frequency = <57600000>;
+       };
 };
 
 &usb0 {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to