Add support for i2c controller on the DB8074 board.
It also adds necessary DT support for i2c eeprom which is present on
DB8074 board.

Signed-off-by: Kiran Padwal <[email protected]>
---
 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts |   21 +++++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi            |   15 +++++++++++++--
 2 files changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts 
b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index b4dfb01..4737049 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -22,6 +22,13 @@
 
 
                pinctrl@fd510000 {
+                       i2c11_pins: i2c11 {
+                               mux {
+                                       pins = "gpio83", "gpio84";
+                                       function = "blsp_i2c11";
+                               };
+                       };
+
                        spi8_default: spi8_default {
                                mosi {
                                        pins = "gpio45";
@@ -41,5 +48,19 @@
                                };
                        };
                };
+
+               i2c@f9967000 {
+                       status = "okay";
+                       clock-frequency = <200000>;
+                       pinctrl-0 = <&i2c11_pins>;
+                       pinctrl-names = "default";
+
+                       eeprom: eeprom@52 {
+                               compatible = "atmel,24c128";
+                               reg = <0x52>;
+                               pagesize = <32>;
+                               read-only;
+                       };
+               };
        };
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi 
b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 69dca2a..e265ec1 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,8 +1,8 @@
 /dts-v1/;
 
-#include "skeleton.dtsi"
-
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include "skeleton.dtsi"
 
 / {
        model = "Qualcomm MSM8974";
@@ -236,5 +236,16 @@
                        #interrupt-cells = <2>;
                        interrupts = <0 208 0>;
                };
+
+               blsp_i2c11: i2c@f9967000 {
+                       status = "disable";
+                       compatible = "qcom,i2c-qup-v2.1.1";
+                       reg = <0xf9967000 0x1000>;
+                       interrupts = <0 105 IRQ_TYPE_NONE>;
+                       clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc 
GCC_BLSP2_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
        };
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to