This patch adds DT binding documentation for the 74xx-mmio GPIO driver.
Signed-off-by: Alexander Shiyan <[email protected]>
---
.../devicetree/bindings/gpio/gpio-74xx-mmio.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
new file mode 100644
index 0000000..202dce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
@@ -0,0 +1,30 @@
+* 74XX MMIO GPIO driver
+
+Required properties:
+- compatible: Should contain one of the following:
+ "ti,74ahc1g125": for 74AHC1G125 (1-bit Input),
+ "ti,74auc1g174": for 74AUC1G74 (1-bit Output),
+ "ti,74lvc2g125": for 74LVC2G125 (2-bit Input),
+ "ti,74hc74": for 74HC74 (2-bit Output),
+ "ti,74hc125": for 74HC125 (4-bit Input),
+ "ti,74hc175": for 74HC175 (4-bit Output),
+ "ti,74hc365": for 74HC365 (6-bit Input),
+ "ti,74hc174": for 74HC174 (6-bit Output),
+ "ti,74hc244": for 74HC244 (8-bit Input),
+ "ti,74hc273": for 74HC273 (8-bit Output),
+ "ti,74ac1624": for 74AC1624 (16-bit Input),
+ "ti,74ac16374": for 74AC16374 (16-bit Output).
+- reg: Physical base address and length where IC resides.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = Active High,
+ 1 = Active Low.
+
+Example:
+ ctrl: gpio@30008004 {
+ compatible = "ti,74hc174";
+ reg = <0x30008004 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--
1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
