On Mon, Sep 22, 2014 at 03:45:48PM +0800, Jingchang Lu wrote:
> From: Jingchang Lu <[email protected]>
>
> Signed-off-by: Alison Wang <[email protected]>
> Signed-off-by: Chao Fu <[email protected]>
> Signed-off-by: Jason Jin <[email protected]>
> Signed-off-by: Xiubo Li <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>
> Signed-off-by: Jaiprakash Singh <[email protected]>
> Signed-off-by: Jingchang Lu <[email protected]>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/ls1021a-qds.dts | 285
> ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 286 insertions(+)
> create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e12fe46..384aa74 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> imx6q-tx6q-1110.dtb \
> imx6sl-evk.dtb \
> imx6sx-sdb.dtb \
> + ls1021a-qds.dtb \
> vf610-colibri-eval-v3.dtb \
> vf610-cosmic.dtb \
> vf610-twr.dtb
> diff --git a/arch/arm/boot/dts/ls1021a-qds.dts
> b/arch/arm/boot/dts/ls1021a-qds.dts
> new file mode 100644
> index 0000000..a0a95f51
> --- /dev/null
> +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> @@ -0,0 +1,285 @@
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +#include "ls1021a.dtsi"
> +
> +/ {
> + model = "LS1021A QDS Board";
> +
> + aliases {
> + enet0_rgmii_phy = &rgmii_phy1;
> + enet1_rgmii_phy = &rgmii_phy2;
> + enet2_rgmii_phy = &rgmii_phy3;
> + enet0_sgmii_phy = &sgmii_phy1c;
> + enet1_sgmii_phy = &sgmii_phy1d;
> + };
> +
> + soc {
> + leds {
I think leds are board level devices and do not have to be under node
"soc"?
> + compatible = "pwm-leds";
Please have a new line between property list and device node ...
> + led0 {
Usually, the instance number shouldn't be directly encoded in node name,
but be part of node name in form of unit-address, i.e. led@0. That also
means we will need a 'reg' property for the node and the following for
the parent node.
#address-cells = <1>;
#size-cells = <0>;
> + label = "led0";
> + pwms = <&pwm3 0 150000 0>;
> + max-brightness = <100>;
> + };
Please also put a new line between device nodes.
> + led1 {
> + label = "led1";
> + pwms = <&pwm3 1 150000 0>;
> + max-brightness = <100>;
> + };
> + led2 {
> + label = "led2";
> + pwms = <&pwm3 2 150000 0>;
> + max-brightness = <100>;
> + };
> + led3 {
> + label = "led3";
> + pwms = <&pwm3 3 150000 0>;
> + max-brightness = <100>;
> + };
> + led4 {
> + label = "led4";
> + pwms = <&pwm3 4 150000 0>;
> + max-brightness = <100>;
> + };
> + led5 {
> + label = "led5";
> + pwms = <&pwm3 5 150000 0>;
> + max-brightness = <100>;
> + };
> + led6 {
> + label = "led6";
> + pwms = <&pwm3 6 150000 0>;
> + max-brightness = <100>;
> + };
> + led7 {
> + label = "led7";
> + pwms = <&pwm3 7 150000 0>;
> + max-brightness = <100>;
> + };
> + };
> + };
> +};
> +
> +&dspi0 {
> + bus-num = <0>;
> + status = "okay";
> +
> + dspiflash: at45db021d@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at45db021d", "atmel,at45",
> "atmel,dataflash";
> + spi-max-frequency = <16000000>;
> + spi-cpol;
> + spi-cpha;
> + reg = <0>;
> + };
> +};
> +
> +&enet0 {
> + tbi-handle = <&tbi0>;
I cannot find this property in any binding doc.
> + phy-handle = <&sgmii_phy1c>;
> + phy-connection-type = "sgmii";
> + status = "okay";
> +};
> +
> +&enet1 {
> + tbi-handle = <&tbi0>;
> + phy-handle = <&sgmii_phy1d>;
> + phy-connection-type = "sgmii";
> + status = "okay";
> +};
> +
> +&enet2 {
> + phy-handle = <&rgmii_phy3>;
> + phy-connection-type = "rgmii-id";
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
Add a new line.
> + pca9547@77 {
> + compatible = "philips,pca9547";
Undocumented compatible.
> + reg = <0x77>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + rtc@68 {
> + compatible = "dallas,ds3232";
> + reg = <0x68>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + ina220@40 {
> + compatible = "ti,ina220";
> + reg = <0x40>;
> + shunt-resistor = <1000>;
> + };
> +
> + ina220@41 {
> + compatible = "ti,ina220";
> + reg = <0x41>;
> + shunt-resistor = <1000>;
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + eeprom@56 {
> + compatible = "at24,24c512";
Undocumented property.
> + reg = <0x56>;
> + };
> +
> + eeprom@57 {
> + compatible = "at24,24c512";
> + reg = <0x57>;
> + };
> +
> + adt7461a@4c {
> + compatible = "adt7461a";
Shouldn't it be "adi,adt7461a"? And if that's case, per
Documentation/devicetree/bindings/hwmon/lm90.txt, vcc-supply is a
required property.
> + reg = <0x4c>;
> + };
> + };
> +
> + i2c@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4>;
> + };
What's this device? Drop it and add it only when you actually need it.
> + };
> +};
> +
> +&ifc {
> + status = "okay";
I generally prefer to put 'status' at the bottom of the property list.
> + #address-cells = <2>;
> + #size-cells = <1>;
> + /* NOR, NAND Flashes and FPGA on board */
> + ranges = <0x0 0x0 0x0 0x60000000 0x08000000
> + 0x2 0x0 0x0 0x7e800000 0x00010000
> + 0x3 0x0 0x0 0x7fb00000 0x00000100>;
> +
> + nor@0,0 {
Drop one level of indentation.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "cfi-flash";
> + reg = <0x0 0x0 0x8000000>;
> + bank-width = <2>;
> + device-width = <1>;
> + };
> +
> + nand@2,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,ifc-nand";
"fsl,ifc" is a documented property, but "fsl,ifc-nand" is not.
> + reg = <0x2 0x0 0x10000>;
> + };
> +
> + fpga: board-control@3,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + reg = <0x3 0x0 0x0000100>;
> + bank-width = <1>;
> + device-width = <1>;
> + ranges = <0 3 0 0x100>;
> +
> + mdio-mux-emi1 {
> + compatible = "mdio-mux-mmioreg";
> + mdio-parent-bus = <&mdio0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x54 1>; /* BRDCFG4 */
> + mux-mask = <0xe0>; /* EMI1[2:0] */
> +
> + /* Onboard PHYs */
> + ls1021amdio0: mdio@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + rgmii_phy1: ethernet-phy@1 {
> + reg = <0x1>;
> + };
> + };
Have a new line.
Shawn
> + ls1021amdio1: mdio@20 {
> + reg = <0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + rgmii_phy2: ethernet-phy@2 {
> + reg = <0x2>;
> + };
> + };
> + ls1021amdio2: mdio@40 {
> + reg = <0x40>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + rgmii_phy3: ethernet-phy@3 {
> + reg = <0x3>;
> + };
> + };
> + ls1021amdio3: mdio@60 {
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + sgmii_phy1c: ethernet-phy@1c {
> + reg = <0x1c>;
> + };
> + };
> + ls1021amdio4: mdio@80 {
> + reg = <0x80>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + sgmii_phy1d: ethernet-phy@1d {
> + reg = <0x1d>;
> + };
> + };
> + };
> + };
> +};
> +
> +&lpuart0 {
> + status = "okay";
> +};
> +
> +&mdio0 {
> + tbi0: tbi-phy@8 {
> + reg = <0x8>;
> + device_type = "tbi-phy";
> + };
> +};
> +
> +&pwm3 {
> + status = "okay";
> +};
> +
> +&pwm7 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> --
> 1.8.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
