This will allow us to define GPIO-attached devices (LEDs, buttons) in
the the device tree.

Signed-off-by: Rafał Miłecki <[email protected]>
---
This is based on top of
[PATCH v6] bcma: register bcma as device tree driver
that I hope will reach wireless-next git tree.

V2: Describe axi chilren and make gpio a child of chipcommon core.
V3: Make chipcommon a GPIO controller (avoid extra sub-child)
    Speed up finding OF node in driver_gpio.c
V4: Simplify setting of_node in driver_gpio.c
---
 Documentation/devicetree/bindings/bus/bcma.txt | 12 ++++++++++++
 drivers/bcma/driver_gpio.c                     |  4 ++++
 2 files changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/bus/bcma.txt 
b/Documentation/devicetree/bindings/bus/bcma.txt
index e9070c1..62a4834 100644
--- a/Documentation/devicetree/bindings/bus/bcma.txt
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
@@ -9,6 +9,11 @@ Required properties:
 The cores on the AXI bus are automatically detected by bcma with the
 memory ranges they are using and they get registered afterwards.
 
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
+detected (e.g. IRQ numbers). Also some of the cores may be responsible
+for extra things, e.g. ChipCommon providing access to the GPIO chip.
+
 Example:
 
        axi@18000000 {
@@ -17,4 +22,11 @@ Example:
                ranges = <0x00000000 0x18000000 0x00100000>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               chipcommon {
+                       reg = <0x00000000 0x1000>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
        };
diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c
index 8ea497c..57ce5fe 100644
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -218,6 +218,10 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 #if IS_BUILTIN(CONFIG_BCM47XX)
        chip->to_irq            = bcma_gpio_to_irq;
 #endif
+#if IS_BUILTIN(CONFIG_OF)
+       if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+               chip->of_node   = cc->core->dev.of_node;
+#endif
        switch (cc->core->bus->chipinfo.id) {
        case BCMA_CHIP_ID_BCM5357:
        case BCMA_CHIP_ID_BCM53572:
-- 
1.8.4.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to