On Wed, Oct 01, 2014 at 05:31:31PM +0100, [email protected] wrote:
> From: Thor Thayer <[email protected]>
>
> Adding L2 Cache and On-Chip RAM EDAC support for the
> Altera SoCs using the EDAC_DEVICE framework. The EDAC
> manager abstracts the common probe functionality and
> test triggers. The L2 Cache and OCRAM files handle
> the specific memory functions.
>
> Signed-off-by: Thor Thayer <[email protected]>
> ---
> .../bindings/arm/altera/socfpga-l2-edac.txt | 15 ++
> .../bindings/arm/altera/socfpga-ocram-edac.txt | 16 ++
> MAINTAINERS | 1 +
> drivers/edac/Kconfig | 14 ++
> drivers/edac/Makefile | 4 +
> drivers/edac/altera_edac_mgr.c | 261
> ++++++++++++++++++++
> drivers/edac/altera_edac_mgr.h | 56 +++++
> drivers/edac/altera_l2_edac.c | 130 ++++++++++
> drivers/edac/altera_ocram_edac.c | 107 ++++++++
> 9 files changed, 604 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
> create mode 100644
> Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
> create mode 100644 drivers/edac/altera_edac_mgr.c
> create mode 100644 drivers/edac/altera_edac_mgr.h
> create mode 100644 drivers/edac/altera_l2_edac.c
> create mode 100644 drivers/edac/altera_ocram_edac.c
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
> b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
> new file mode 100644
> index 0000000..35b19e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
> @@ -0,0 +1,15 @@
> +Altera SoCFPGA L2 cache Error Detection and Correction [EDAC]
> +
> +Required Properties:
> +- compatible : Should be "altr,l2-edac"
That string looks too generic.
Given the EDAC seems to be a portion of the L2, is there not already an
L2 binding?
Just because Linux expects two drivers doesn't mean we should partition
the HW description this way.
> +- reg : Address and size for ECC error interrupt clear registers.
> +- interrupts : Should be single bit error interrupt, then double bit error
> + interrupt. Note the rising edge type.
> +
> +Example:
> +
> + l2edac@ffd08140 {
> + compatible = "altr,l2-edac";
> + reg = <0xffd08140 0x4>;
> + interrupts = <0 36 1>, <0 37 1>;
> + };
> diff --git
> a/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
> b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
> new file mode 100644
> index 0000000..31ab205
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
> @@ -0,0 +1,16 @@
> +Altera SoCFPGA On-Chip RAM Error Detection and Correction [EDAC]
> +
> +OCRAM ECC Required Properties:
> +- compatible : Should be "altr,ocram-edac"
> +- reg : Address and size for ECC error interrupt clear registers.
> +- iram : phandle to On-Chip RAM definition.
Why not just describe this in the OCRAM node? Surely the register is
within the OCRAM controller?
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
