On Mon, Oct 06, 2014 at 09:59:48AM +0900, Yoshihiro Shimoda wrote:
> Hello.
>
> (2014/10/04 4:50), Sergei Shtylyov wrote:
> > On 10/02/2014 12:04 PM, Yoshihiro Shimoda wrote:
> >
> >> Signed-off-by: Yoshihiro Shimoda <[email protected]>
> >> ---
> >> arch/arm/boot/dts/r8a7790-lager.dts | 5 +++++
> >> 1 file changed, 5 insertions(+)
> >
> >> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> >> b/arch/arm/boot/dts/r8a7790-lager.dts
> >> index 1698591..4badd0a 100644
> >> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> >> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> >> @@ -445,3 +445,8 @@
> >> };
> >> };
> >> };
> >> +
> >> +&hsusb {
> >> + status = "okay";
> >> + renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_LOW>;
> >
> > It's certainly active-high.
>
> Since the current code has the following, we have to set the active_low...
> However, the code is unreadable, I think. So, I will modify the code.
It seems to me that would be best.
As far as possible the bindings and their use should
describe the hardware rather than the software.
> /* check GPIO determining if USB function should be enabled */
> if (priv->dparam.enable_gpio) {
> gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
> ret = !gpio_get_value(priv->dparam.enable_gpio);
> gpio_free(priv->dparam.enable_gpio);
> if (ret) {
> dev_warn(&pdev->dev,
> "USB function not selected (GPIO %d)\n",
> priv->dparam.enable_gpio);
> ret = -ENOTSUPP;
> goto probe_end_mod_exit;
> }
> }
>
> Best regards,
> Yoshihiro Shimoda
>
> > WBR, Sergei
> >
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
