This changes muxes in gpio26 pin to function as gpio and adds support for sd card detect for apq8064 based IFC6410 board.
Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Russell King <[email protected]> Cc: Srinivas Kandagatla <[email protected]> Signed-off-by: Pramod Gurav <[email protected]> --- Changes since v2: - Replaced hardcode value with GPIO_ACTIVE_LOW arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index b396c83..e641001 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,4 +1,5 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -12,6 +13,14 @@ function = "gsbi1"; }; }; + + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; }; gsbi@12440000 { @@ -49,6 +58,9 @@ /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
