Remove incorrect "bcm963xx_uart" module name; add a list of known users; tweak grammar/indentation/capitalization.
Signed-off-by: Kevin Cernekee <[email protected]> Acked-by: Florian Fainelli <[email protected]> --- drivers/tty/serial/Kconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4a5c0c8..815b652 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1281,22 +1281,24 @@ config SERIAL_TIMBERDALE Add support for UART controller on timberdale. config SERIAL_BCM63XX - tristate "bcm63xx serial port support" + tristate "Broadcom BCM63xx/BCM33xx UART support" select SERIAL_CORE depends on MIPS || ARM || COMPILE_TEST help - If you have a bcm63xx CPU, you can enable its onboard - serial port by enabling this options. + This enables the driver for the onchip UART core found on + the following chipsets: - To compile this driver as a module, choose M here: the - module will be called bcm963xx_uart. + BCM33xx (cable modem) + BCM63xx/BCM63xxx (DSL) + BCM68xx (PON) + BCM7xxx (STB) - DOCSIS console config SERIAL_BCM63XX_CONSOLE - bool "Console on bcm63xx serial port" + bool "Console on BCM63xx serial port" depends on SERIAL_BCM63XX=y select SERIAL_CORE_CONSOLE help - If you have enabled the serial port on the bcm63xx CPU + If you have enabled the serial port on the BCM63xx CPU you can make it the console by answering Y to this option. config SERIAL_GRLIB_GAISLER_APBUART -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
