Marvell Berlin BG2 based Sony NSZ-GS7 has an unpopulated SATA plug on its PCB solder side. As it is quite easy to populate and I have done it, enable AHCI and SATA by default.
Acked-by: Antoine Ténart <[email protected]> Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Cc: Kishon Vijay Abraham I <[email protected]> Cc: "Antoine Ténart" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index c72bfd468d10..0a13e8a5da15 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -26,4 +26,11 @@ }; }; +&ahci { status = "okay"; }; + +/* Unpopulated SATA plug on solder side */ +&sata0 { status = "okay"; }; + +&sata_phy { status = "okay"; }; + &uart0 { status = "okay"; }; -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
