Hi Ulrich,
On Fri, Oct 31, 2014 at 4:01 PM, Ulrich Hecht
<[email protected]> wrote:
> Support for setting the parent at initialization time based on the current
> hardware configuration in DIV6 clocks with selectable parents as found in
> the r8a73a4, r8a7740, sh73a0, and other SoCs.
Thanks for your patch!
> --- a/drivers/clk/shmobile/clk-div6.c
> +++ b/drivers/clk/shmobile/clk-div6.c
> @@ -32,6 +32,9 @@ struct div6_clock {
> struct clk_hw hw;
> void __iomem *reg;
> unsigned int div;
> + int src_shift;
> + int src_width;
unsigned int or u32 (both)
> + u8 *parents;
> };
>
> #define to_div6_clock(_hw) container_of(_hw, struct div6_clock, hw)
> +static unsigned char cpg_div6_clock_get_parent(struct clk_hw *hw)
Please return u8, cfr. clk_ops.get_parent()
> +{
> + struct div6_clock *clock = to_div6_clock(hw);
> + u8 hw_index;
> + int i;
unsigned int
> + if (clock->src_width == 0)
> + return 0;
> +
> + hw_index = (clk_readl(clock->reg) >> clock->src_shift) &
> + (BIT(clock->src_width) - 1);
> + for (i = 0; i < hw->init->num_parents; i++) {
Is hw->init still valid here?
I believe it's a pointer to local stack variable "struct clk_init_data init"
in cpg_div6_clock_init(), which was never copied?
Use __clk_get_num_parents(hw->clk) instead, cfr. clk-mux?
> + if (clock->parents[i] == hw_index)
> + return i;
> + }
> +
> + pr_err("%s: %s DIV6 clock set to invalid parent %d\n",
%u for u8
> + __func__, hw->init->name, hw_index);
> + return 0;
> +}
It's a bit unfortunate that clk_ops.get_parent() cannot return an error code,
as u8 is positive. Perhaps it should return int instead?
However, as clk_mux_get_parent() does return -EINVAL if the clock
can't be found, perhaps it's best to mimic that behavior?
__clk_init_parent() calls clk_get_parent_by_index(), which does check
if the index fits within the allowed range.
__clk_init() uses the returned value to index parent_names[] without any
checking. Oops...
Mike?
> +static int cpg_div6_clock_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct div6_clock *clock = to_div6_clock(hw);
> + u8 hw_index;
> + u32 mask;
> +
> + if (index >= hw->init->num_parents)
Is hw->init still valid here?
Use __clk_get_num_parents(hw->clk) instead, cfr. clk-mux?
> + return -EINVAL;
> +
> + mask = ~((BIT(clock->src_width) - 1) << clock->src_shift);
> + hw_index = clock->parents[index];
> +
> + clk_writel((clk_readl(clock->reg) & mask) |
> + (hw_index << clock->src_shift), clock->reg);
>
> return 0;
> }
> @@ -115,12 +164,17 @@ static const struct clk_ops cpg_div6_clock_ops = {
>
> static void __init cpg_div6_clock_init(struct device_node *np)
> {
> + const char **parent_names;
> struct clk_init_data init;
> struct div6_clock *clock;
> - const char *parent_name;
> const char *name;
> struct clk *clk;
> + int valid_parents;
> + int num_parents;
unsigned int (both)
> + u32 src_shift;
> + u32 src_width;
> int ret;
> + int i;
unsigned int
> @@ -129,6 +183,24 @@ static void __init cpg_div6_clock_init(struct
> device_node *np)
> return;
> }
>
> + num_parents = of_clk_get_parent_count(np);
> + if (num_parents < 1) {
> + pr_err("%s: no parent found for %s DIV6 clock\n",
> + __func__, np->name);
> + return;
> + }
> +
> + clock->parents = kmalloc_array(num_parents, sizeof(*clock->parents),
> + GFP_KERNEL);
> + parent_names = kmalloc_array(num_parents, sizeof(*parent_names),
> + GFP_KERNEL);
> +
Please drop the blank line above.
> + if (!parent_names) {
> + pr_err("%s: failed to allocate %s parent name list\n",
> + __func__, np->name);
There's no need to print an error in case of allocation failures.
> + return;
> + }
> +
> /* Remap the clock register and read the divisor. Disabling the
> * clock overwrites the divisor, so we need to cache its value for the
> * enable operation.
> @@ -150,19 +222,38 @@ static void __init cpg_div6_clock_init(struct
> device_node *np)
> goto error;
> }
>
> - parent_name = of_clk_get_parent_name(np, 0);
> - if (parent_name == NULL) {
> - pr_err("%s: failed to get %s DIV6 clock parent name\n",
> - __func__, np->name);
> - goto error;
> +
> + for (i = 0, valid_parents = 0; i < num_parents; i++) {
> + const char *name = of_clk_get_parent_name(np, i);
> +
> + if (name) {
> + parent_names[valid_parents] = name;
> + clock->parents[valid_parents] = i;
> + valid_parents++;
> + }
> + }
> +
> + if (!of_property_read_u32(np, "renesas,src-shift", &src_shift)) {
> + if (!of_property_read_u32(np, "renesas,src-width",
> + &src_width)) {
> + clock->src_shift = src_shift;
> + clock->src_width = src_width;
> + } else {
> + pr_err("%s: renesas,src-shift without
> renesas,src-width in %s\n",
> + __func__, np->name);
> + goto error;
> + }
> + } else {
> + clock->src_shift = clock->src_width = 0;
> }
The above construct does allow renesas,src-width without renesas,src-shift.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
