On 12:09-20141103, Roger Quadros wrote:
> For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the
> PULL_DIS bit which disables the PULLs.
>
> PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't
> use it in the PIN_OUTPUT_PULLUP/DOWN macros.
>
> Fixes: 23d9cec07c58 ("pinctrl: dra: dt-bindings: Fix pull enable/disable")
>
> Signed-off-by: Roger Quadros <[email protected]>
> ---
> include/dt-bindings/pinctrl/dra.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/dt-bindings/pinctrl/dra.h
> b/include/dt-bindings/pinctrl/dra.h
> index 3d33794..7448edf 100644
> --- a/include/dt-bindings/pinctrl/dra.h
> +++ b/include/dt-bindings/pinctrl/dra.h
> @@ -40,8 +40,8 @@
>
> /* Active pin states */
> #define PIN_OUTPUT (0 | PULL_DIS)
> -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
> -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
> +#define PIN_OUTPUT_PULLUP (PULL_UP)
> +#define PIN_OUTPUT_PULLDOWN (0)
> #define PIN_INPUT (INPUT_EN | PULL_DIS)
> #define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
> #define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
You are right, we do have an issue with using PIN_OUTPUT along with
remaining setting.
For a moment, I wondered why input was not impacted - then I realized
that INPUT_EN was being used instead of PIN_INPUT - following that
convention. With the intent being explicitly using macros that
clearly indicate what each setting combination is is, how about the
following?
diff --git a/include/dt-bindings/pinctrl/dra.h
b/include/dt-bindings/pinctrl/dra.h
index 3d33794..d4037e7 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -34,14 +34,15 @@
#define PULL_DIS (1 << 16)
#define PULL_UP (1 << 17)
#define INPUT_EN (1 << 18)
+#define OUTPUT_EN (0 << 18)
#define SLEWCONTROL (1 << 19)
#define WAKEUP_EN (1 << 24)
#define WAKEUP_EVENT (1 << 25)
/* Active pin states */
-#define PIN_OUTPUT (0 | PULL_DIS)
-#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
+#define PIN_OUTPUT (OUTPUT_EN | PULL_DIS)
+#define PIN_OUTPUT_PULLUP (OUTPUT_EN | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN (OUTPUT_EN | PULL_ENA)
#define PIN_INPUT (INPUT_EN | PULL_DIS)
#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
